1/2 Inch (12 mm) Drill Bit for 306 Leveling System
Ends Jul 09
Diameter:
Large Project?
Orders $2500+ Qualify for Special Discounts.
Build your item list and get a Quick Quote
view bid cartAll the product info you could ask for...
-
Size Info
- Diameter : 12 mm
- Flute Length : 110 mm
- Overall Length : 151 mm
- Shank Diameter : 8 mm
-
Manufacturer Info
- Manufacturer : Peter Meier
- Manufacturer Part # : BIT-12
- Manufacturer Finish : Steel
-
Other Important Info
- Product Type : Drill Bit
- Compatible with : for 306-MA-12 template
- Material : Chrome Vanadium Steel
- Product Finish : Steel
- Center Point : Yes
- Drilling Spped : 1500-3000 RPM
- Usage : Wood and Wood Composites
Manufacturer Resources
Other - Metal Levelers by Peter Meier
Our customers say Peter Meier products...
based on 42 ratings
- 5 of 5 Perfect March 16th, 2026
by Scott from Alto, MI(no comment given)
This review is about similar Peter Meier Furniture Components. (PMI-428S-10AD-H5)
- 4 of 5 Product details with a Quote March 2nd, 2026
by Bipin from Monroe, NCThe product is what we were looking for, and the price is good too against other. We did ask for the quote, and we got the quote with details we needed.
This review is about similar Peter Meier Furniture Components. (PMI-304-50-A2)
- 3 of 4 people found the following review helpful
3 of 5 Plastic leveler April 14th, 2016
by Limond from McLean, VADid not realize that screws were not included. No big deal- would have ordered screws when I ordered leveler . Extra work that could have been avoided
This review is about similar Peter Meier Furniture Components. (PMI-400-415B)
- 3 of 3 people found the following review helpful
5 of 5 Perfect January 6th, 2012
by Ryan from Raleigh, NCThese legs are easy to install and quite strong. I used six of them to hold up a 48" wide, 8' tall cabinet. Getting the cabinet up was a bit of a challenge. What I did was only fully attach the 3 rear legs. The front 3 legs I only attached the base with the cabinet laying face down. I then laid down a board along the ground so the 3 leg bases would rest on it when the cabinet was lifted. That way I wasn't putting weight on the front legs at a steep angle, and the cabinet could lift up to ~75 degrees before putting any stress on the back legs. Then just lifted it up and had someone stick in the remaining 3 legs while I held it steady.
This review is about similar Peter Meier Furniture Components. (PMI-400-415B)
- 2 of 2 people found the following review helpful
5 of 5 great legs May 8th, 2014
by Scott from Fort Worth, TXWe use these legs on all our kitchens and they are a great product.
This review is about similar Peter Meier Furniture Components. (PMI-400-350)
Reviews about us...
- 5 of 5 | June 27th, 2026
Ordered 18 sets of Salice Progressa and they got here in two days! Exactly what I needed and super quick. Would absolutely use you guys again.
- 5 of 5 | June 27th, 2026
Came on time and was exact replacement. I needed slightly larger diameter screws because the hole in the cabinet got larger.This is the screws that attach hinge to the frame not to the doors
- 5 of 5 | June 27th, 2026
Ordered the two bin trash/Recyclables slider unit. Solid construction and easy to install with basic woodworking/assembly skills. Very happy with the end result.
- 5 of 5 | June 27th, 2026
The cabinet knobs I ordered were exactly right. I had purchased other knobs that were similar at my local big box hardware store, however, each one was defective because the screw holes had not been properly drilled into them and were useless. I decided t
- 4 of 5 | June 27th, 2026
From order date to rec. 11 days. Long time by today's standards
PMI 300 Heavy Duty Metal Base Leveler, 1-1/4 Inch Height Recessed Bottom Required, 3/4 Inch Adjustable, 330 Pound Capacity
PMI 306 Concealed Metal Base Leveler, 1-1/4 (32mm) to1-7/8 Inch Height (86.5mm) x 1/2 Inch (12mm) Diameter, 330 Pound Capacity
PMI 300 Regular Duty Metal Base Leveler, 1-1/4 Inch Height Recessed Bottom Required, 3/4 Inch Adjustable, 220 Pound Capacity
PMI 306 Concealed Metal Base Leveler, 2 Inch(52mm) to 2-3/4 Inch Height (68mm) x 1/2 Inch (12mm) Diameter, 330 Pound Capacity
3-3/4, 4-3/4 Inch Height Adjustment Two-Piece 350 Metal Leveler
PMI 31B Adjustable 3-1/2 Inch to 4-3/4 Inch Height ABS Plastic 4-Leg Leveler Complete Installation Set, Black
4, 6-1/2 Inch Height Adjustment 345 Metal Leveler, Black
PMI 306 Concealed Metal Base Leveler, 2-7/8 (70mm) to 3-1/2 Inch Height (89mm) x 1/2 Inch (12mm) Diameter, 330 Pound Capacity
Drill Template for 1/2 Inch (12 mm) 306 Concealed Levelers
PMI 28B Adjustable 4 Inch to 6-1/2 Inch Height Metal 4-Leg Leveler Complete Installation Set, Metal Finish
5-1/4, 7-3/4 Inch Height Adjustment 345 Metal Leveler, Black
6-1/2, 9 Inch Height Adjustment 345 Metal Leveler, Black
PMI 4-Leg Metal Cabinet Leveler Set, 4 to 6-1/2 Inch Height Adjustable, Groove Mount Clip and Hollow Bolt Socket Included, Black
PMI 306 Concealed Metal Base Leveler, 4-5/8 Inch(100mm) to 5-3/8 Inch Height (136.5mm) x 1/2 Inch (12mm) Diameter, 330 Pound Capacity
PMI 306 Concealed Metal Base Leveler, 4-3/4 (120mm) to 5-3/8 Inch Height (136.5mm) x 1/2 Inch (12mm) Diameter, 330 Pound Capacity
PMI 26B Adjustable 4 Inch to 6-1/2 Inch Height Metal 4-Leg Leveler Complete Installation Set, Metal Finish
PMI 29B Adjustable 4-3/4 Inch to 5-3/4 Inch Height ABS Plastic 4-Leg Leveler Complete Installation Set, Black
6, 6-3/4 Inch Height Adjustment Two-Piece 340 Metal Leveler
PMI 4-Leg Metal Cabinet Leveler Set, 4 to 6-1/2 Inch Height Adjustable, Groove Mount Clip and Wood Screw Mount Socket Included, Black
1/2 Inch (12 mm) Drill Bit for 306 Leveling System
Drill Template for 9/16 Inch (14 mm) 306 Concealed Levelers
9/16 Inch Diameter 306 Concealed Leveler
9/16 Inch (14 mm) Drill Bit for 306 Leveling System