BH175H7100

by Barry from Miami, FL on October 20th, 2009

perfect - use the template for exact alignment.

by David from Clinton, OH on October 19th, 2009

(no comment given)

by stephen from Collegeville, PA on October 8th, 2009

saw your video showing how the product snapped together, might have had a problem had i not seen the video. all went well will use you in the future, since i am a handyman and replace cabinet hinges all the time. most are not stocked by home depot and lowes.

by Louis J from Brick, NJ on October 2nd, 2009

This clip on hinge mounting plate replaced the screw on plate perfect on the 2 side screw holes. The back mounting hole does not line up with the screw hole from the old mounting plate. Before you mount the new Plate fill the old hole with tooth picks and glue.Let it set up then pre drill a new hole in the proper location. This will prevent the cabinat from spliting and stripping out the rear or 3rd hole.This will work great!

by Jana from Visalia, CA on September 15th, 2009

This product worked wonderfully. It helped my bifold doors to sit perfectly.

by John from Florissant, MO on September 9th, 2009

Excellent product, fit perfectly on my kitchen cabinet shelving doors. Part difficult to find locally and was just what I needed at a good price. Thanks

by Marco from Glen Head, NY on September 4th, 2009

(no comment given)

by Mike from Springboro, OH on August 31st, 2009

(no comment given)

by earnest e slaughter from richmond, VA on August 23rd, 2009

When replacing the old style hinges, I could not quite adjust the newer style same as the older ones. But is okay.

by Michael J from Newbury Park, CA on August 21st, 2009

Ehm. This is just a mounting plate. It is really nice and easily adjustable, but I don't see going on about it. However, working with you and your site is a pleasure. For the first time ever I no longer even bother shopping around.

by David W from Tinton Falls, NJ on August 18th, 2009

(no comment given)

by Karen J from Duluth, GA on August 12th, 2009

Thank you so much for all your help. The parts I ordered was a perfect fit. When I had a question on how to install the parts, I sent an e-mail to the company and within less than 5 minutes, my phone was ringing and it was Dave offering me help. Within 15 minutes, I had my dresser put back together. I am glad to know that if I ever need something from cabinetparts.com I can rely on them. Thanks again for all your help!

by Mitchell K from Woodbury, NY on August 9th, 2009

(no comment given)

by stephen r from Boulder, CO on August 5th, 2009

It was wonderfull connecting with you all.
I ordered some hard to find Blum parts, reviewed my project and was able to cancel the order. I was happy with the service offered by you all. I look forward to doing something with you again. Steve Priem

by Jerry from Fairhope, AL on August 3rd, 2009

great quality and just what we needed!

by Andrew from Cambria Heights, NY on July 27th, 2009

(no comment given)

by Jeffrey from Salem, MA on July 27th, 2009

(no comment given)

by Patricia from New York, NY on July 23rd, 2009

(no comment given)

by David from Standish, ME on July 8th, 2009

(no comment given)

by Martin from Voorhees, NJ on June 26th, 2009

great service, matched up perfectly with just a picture to go on. thanks so much.

by Cahrles J from Centerville , PA on June 14th, 2009

Please, let me thank you for waiting for my reply.
"THAT IS GOOD STUFF"

by Romeo N from Mountlake Terrace, WA on May 26th, 2009

(no comment given)

by Jeffrey from Ormond Beach, FL on May 19th, 2009

(no comment given)

by Michael from Lynnfield, MA on May 18th, 2009

(no comment given)

by Robert from Mullica Hill, NJ on May 12th, 2009

quick, easy, and perfect repair for my kitchen cabnet.

by Richard from Danville, CA on April 28th, 2009

Cabinets are now complete thanks to your technician help...the best!

by angel from Miami, FL on April 10th, 2009

(no comment given)

by Thomas from Franklin, TN on April 4th, 2009

(no comment given)

by Greg from Springboro, OH on March 23rd, 2009

(no comment given)

by Tom from Virginia Beach, VA on March 21st, 2009

Was exactly what I needed.

by Donna from Fort Lauderdale, FL on March 10th, 2009

Exellent prooduct. Replaced the original model easily only operates much better. Great

by thomas from Drexel Hill, PA on March 2nd, 2009

Recommend that parts be clearly described for compatability with each other. Otherwise, great product and price.

by Donald R from Cramerton, NC on February 26th, 2009

I wasn't sure about the overlay after reading the tech sheet it was clearer, I bought the 0mm mounting plate and had plenty of adjustment available for a very professional installation.

by Thomas J from Portland, OR on February 25th, 2009

Worked as advertised

by Russell C from Overland Park, KS on February 23rd, 2009

I needed a replacement hinge. I looked at your website then sent you an email. Your followup to my email was the most important part in directing me to the new part # I needed and letting me know I would need to replace both hinges to make it work on a given cabinet door. Thank you for your help.

Rusty Leffel - Kansas City

PS My only note back would be that your website might give a little more explanation on what "extras" might be needed and then add a sentence on why. I did not end up needing the screws because I used the ones already in the old hinges, but it was important that I had them and again your cusomter service tipped me off to look at the extras page to see what I might need.

by Richard from Sandwich, MA on February 21st, 2009

(no comment given)

by Edward from Marathon, FL on February 18th, 2009

Just what we needed.

by Sam from Onancock, VA on February 18th, 2009

(no comment given)

by michael from New York, NY on February 14th, 2009

makes tweeking easy.

by james from Fairfax Station, VA on February 10th, 2009

(no comment given)

by Merry from Saint Petersburg, FL on February 6th, 2009

Exactly replaced an old part, with your help selecting the correct part.

by Richard M from Sandwich, MA on February 5th, 2009

love the adjustability

by tom from Joliet, IL on January 28th, 2009

(no comment given)

by Richard L from Macungie, PA on January 27th, 2009

Delivery was great and the hinges are simple to install and adjust. Were the screws suppose to come with the hinges? They were not included in my shipment.

by Robert from West Chester, PA on January 20th, 2009

Your service was excellant !!! I ordered the wrong hinges by mistake. I am looking for a 170 degree hinge, that throws the half lap door totally away from the cabinet...the cabinet has a drawer

by Matthew from Commack, NY on January 13th, 2009

OEM replacement. I have Blum hardware on all my kitchen cabinets. For the 10 years I have had these cabinets, I have had to replace many of the door hinges tho this was the first mounting place I had to replace for a corner base cabinet door.

by Joanne M from Kirkwood, NY on December 30th, 2008

The first parts that we received (after calling and speaking to somebody were WAY off) After calling back, and speaking to somebody else, the correct parts were received. We were given the 107 degree hinges, but needed the 45 degree ones....not even close.
Anyway - the experience with the second person was very nice.....he knew what he was talking about and we are now satisfied. Thanks!!

by Roger from Moss Landing, CA on December 28th, 2008

Nicely made. Just what I wanted

by Gary H from Breckenridge, CO on December 15th, 2008

(no comment given)

by Howard B from Massapequa, NY on December 11th, 2008

(no comment given)