Mepla ACC 140 - 130 Degree Face Frame Hinge Replacement

Replacing the Mepla ACC 140 130 Degree Face Frame Hinge

Are you trying to find a replacement for your Mepla ACC 140 - 130 Degree Face Frame Hinge? We have put together this guide to make it easy for you. Grass discontinued this hinge which is also known as the MH11-186. Although there is no direct replacement, we have your solution. 

Step One: You must determine the correct overlay. The ACC 140 had an overlay adjustment range of 1-1/32" to 1-1/8".

Here is a video to help you determine your overlay:

Step Two: Once the overlay is determined, the customer will need to fill the 35mm bore hole with bondo or wood and re-drill the 35mm bore in the correct position for the Grass and Blum Compact Style hinges (The Compact 33 by Blum and the TEC 864 by Grass)

• The correct position will be 3mm from the edge of the door to the edge of the borehole
• The hole will be 35mm in diameter and 1/2" deep
• The bore hole can be in the same up-and-down location as the old hinge...just with the corrected setback

Step Three: If the customer has the overlay of 1-1/32" +/-, use the Grass TEC 864 Series hinge with 1" overlay, item number GHA2946. The adjustment in the hinge will allow for a 1/16" +/- adjustment. 

Option B: If the customer has the overlay of 1-1/8" +/-, use the Salice, item number SH-CSR3199N.  

Adjusting the hinge and base will allow for 2mm +/- adjustment.

Shop All our European Cabinet Hinges. We also offer our Hinge Matching Service where you can send us photos of any part you need to identify. 

If you need further assistance, please feel free to contact us. 

**Please note: Manufacturers have changed hinge designs over the years, and therefore, the screw hole placement can not be guaranteed.