CompX 7014 1-5/8" Length Double Formed Disc Tumbler Cam with 15/16" Offset for Overlay Applications
CompX pin and tumbler locks offer reliable security for a variety of cabinet and drawer applications, including right-hand or left-hand doors with lipped/overlay or flush constructions. Depending on the model, these locks come equipped with either a straight or formed cam to suit your installation type. In overlay setups, ensure that the combined thickness of the cabinet front and frame does not exceed the lock's cylinder length for proper cam engagement. These locks operate with a 90 Degrees cam rotation, and most allow the key to be removed in both locked and unlocked positions ideal for flexible access control. CompX pin and tumbler locks are available in a variety of keying configurations, including keyed alike, keyed differently, and master keying options. While many models can be master keyed (commonly using the M1 master key), others are offered without master key capability to meet specific security requirements. Standard packaging typically includes two keys, a trim washer, a spur washer for wood applications, a mounting nut, and two cams. For metal applications, a flat washer may be required and is usually sold separately.
Ends Jun 21
Large Project?
Orders $2500+ Qualify for Special Discounts.
Build your item list and get a Quick Quote
view bid cartAll the product info you could ask for...
-
Size Info
- Cylinder Length : 3/4"
-
Manufacturer Info
- Manufacturer : CompX
- Manufacturer Part # : C7014-2C
- Manufacturer Finish : Zinc
-
Other Important Info
- Product Type : Cabinet Lock
- Product Finish : Zinc
- For : C8053 Series Locks
- Lock Type : Cam
Manufacturer Resources
Other - Cam Locks by CompX National
Our customers say CompX products...
based on 79 ratings
- 0 of 1 people found the following review helpful
5 of 5 Desert Pueblo MHP June 29th, 2025
by Roger from Tucson, AZThese locks were identical to previous purchase and there were no hang-ups. A very good product that was easy to install.
This review is about similar CompX Hinges. (NL-8053MKND)
- 2 of 2 people found the following review helpful
3 of 5 Cabinet locks September 28th, 2018
by Jacob from Huntersville, NCI ordered some locks from a link I found when searching the parts I needed, once I put those parts in the cart and started looking for other parts I needed I found the website to be difficult to navigate, slow/no response from customer service and ultimately went elsewhere for the other parts I needed. It is not likely that I will return to this site to order again as I need or prefer a one stop shop when jobs come up and I need everything to complete a project in a timely manner.
This review is about similar CompX Hinges. (NL-8053415NA)
- 2 of 2 people found the following review helpful
4 of 5 Cam lock master key April 19th, 2016
by Wildon from Louisville, KYItem as listed,good quality,good price ,used to unlock file cabinet,original keys were lost or missing.
This review is about similar CompX Hinges. (NL-8799)
- 2 of 2 people found the following review helpful
5 of 5 Just what I needed ! May 8th, 2015
by Donald from Doylestown, PAJust what I needed, they work with each ones own key and with my master key. Great price and fast, hardly any wait! THANKS
This review is about similar CompX Hinges. (NL-8053MKND)
- 1 of 1 people found the following review helpful
4 of 5 Cam Lock July 7th, 2023
by Joe from Paramus, NJExactly what I needed to finish my project. Works as intended. Highly recommend.
This review is about similar CompX Hinges. (NL-8053346NA)
Reviews about us...
- 5 of 5 | June 14th, 2026
It works great, insrtuctions perfect, well made
- 5 of 5 | June 14th, 2026
easy to ordergood pricingfast deliverygood overall customer servicethanks for doing a good job
- 5 of 5 | June 14th, 2026
I attempted to reach the Haas cabinet company, as I have done in the past, from drawer replacement parts. I could not reach them. I found this company on line and appreciated the personalized help from them. She walked thru the entire measurement process
- 5 of 5 | June 12th, 2026
I had a broken hinge that I did not diagnose properly until a friend suggested -"just replace it with the kind you have". She helped me find it on your website. It came quickly, I installed and all my troubles disappeared. The door swings solid now like i
- 5 of 5 | June 12th, 2026
Website is helpful, items delivered quickly.
CompX Timberline 90-Degree Angled Strike Plate, Screw-Mount, 1/2" High x 3/4" Depth x 7/8" Width, Nickel
CompX FFSK2-LT Letter Size File Frame Kit including Side, Front and Back Rails with Hanging Brackets, Black
CompX 8060 Disc & Tumbler Cam Lock, 1-3/4" Cylinder Length, 1-7/16" Material, Keyed Alike #415, Bright Nickel
CompX 7005 3" Length Straight Disc Tumbler Cam
CompX 8053 Disc & Tumbler Cam Lock for up to 7/8" Maximum Material Thickness, Keyed Alike #C415A, Black
CompX AP-037 3/8" Adjustable Pin for Gang Locking Drawer Boxes
CompX 8053 Black Disc & Tumbler Cam Lock, 90 Degree Cam Turn, Flush /Lipped/Overlay, 1-3/16" Cylinder Length, 7/8" Max. Door Thickness, Keyed #413
CompX Replacement Strike Plate for use with all StealthLock Receiver Latches, 3/8" Width 1-1/4" Height, Black
CompX 8053 Disc & Tumbler Cam Lock for 1-18" Material, Keyed Alike # 316, 3/4" Diameter Drilling Required, Antique Brass
CompX 8055 Disc & Tumbler Cam Lock, 90 Degree Cam Turn, Flush/Lipped/Overlay, 1-7/16" Cylinder Length, Max. Material Thickness 1-1/8", Keyed Alike, 3/4" Mounting Hole, Master Keyed #415, Bright Nicke
CompX FFSK2-LT Legal Size File Frame Kit including Side, Front and Back Rails with Hanging Brackets, Black
CompX KY-500 TA Series Plug Removal Tool from Cylinder Body
CompX 90- Degree Angled Strike Plate, Screw-Mount, 1/2" High x 3/4" Depth x 7/8" Width, Black
CompX 8178 Dull Chrome Cabinet Door Lock, Keyed Alike # 001, 7/8" Cylinder Length, 15/16" Diameter Mounting Hole
CompX 8060 Cam Lock, 1-3/4" Cylinder Length, 1-7/16" Material, 7/8" Diameter Installation Hole, Keyed Alike #415, Black
CompX 2002 1-3/4" Length x 1/2" Wide Formed Strike Plate with Screws
CompX Sl-100 Keyless Stealth Lock Kit including Touch-Pad Receiver, Wireless Transmitter, Installation Tool, and Strike Plate
CompX 8055 Disc & Tumbler Cam Lock for 1-18" Material, Keyed Alike # 415, 3/4" Diameter Drilling Required, Antique Brass
CompX 8060 Disc & Tumbler Cam Lock, 1-3/4" Cylinder Length, 1-7/16" Material, Keyed Alike Master Key #346, 3/4" Mounting Hole, Antique Brass
CompX 8052 Disc & Tumbler Cam Lock, 90 Degree Cam Turn, Flush or Lipped/Overlay, 5/8" Cylinder Length, 15/64" Material, Keyed Alike, 3/4" Mounting Hole, Master Keyed #415, Bright Nickel
CompX 7008 Zinc Plated 1-1/2" Disc & Tumbler Hook Cam
CompX D4299 Pin and Tumbler Master Key for C8173, C8178, C8179 Series Locks
CompX KY-101-1T Master Key for TA Series Lock Plugs
CompX LC-106 Lockbar Clip for Gang Lock Applications for Use with SYS-104
CompX Sl-100 Keyless Stealth Lock Kit including Touch-Pad Receiver, Installation Tool, and Strike Plate, Wireless Transmitter Sold Separately
CompX 8090 Disc & Tumbler Multi-Drawer Gang Lock, 15/16" Cylinder Length 7/8" Diameter Hole Required, Keyed Alike #415, Bright Nickel
CompX 8055 Disc & Tumbler Cam Lock, 90 Degree Cam Turn, Flush or Lipped/Overlay, 1-7/16" Cylinder Length, 1-1/8" Max. Door Thickness, Keyed Alike, 3/4" Mounting Hole, Master Keyed #413, Bright Nickel
CompX 8173 Dull Chrome Cabinet Door Lock, Keyed Different, 7/8" Cylinder Length, 15/16" Mounting Hole Diameter, Master Key #107
CompX 8060 Disc & Tumbler Cam Lock, 1-3/4" Cylinder Length, 1-7/16" Material, Keyed Alike #346, Bright Nickel
CompX Bezel BZ-100 for 16.5mm Cylinder Diameter Body, Bright Nickel
CompX Bezel BZ-100 for 16.5mm Cylinder Diameter Body, Black
CompX CB-101 Type 101, 3/4" Length Cylinder Body, 3/4" Material
CompX DC-500 Drawer Locking Clip for Gang Lock System and 1/2" Drawer Slides/Suspension
CompX LB-240 Lockbar for use with Gang Lock Systems and Linkage Bars for Anti-Tip Mechanisms
CompX LC-104 Right Hand Lockbar Clip for Gang Lock Applications for use with SYS-104 and Pin Cam Locks
CompX LR-100 Lockbar Retainer, Holds Lockbar in Lockbar Groove, Used in Gang Locks and as Linkage Bar
CompX RL-APC-3 Power Cord for Stealth Lock Plug-In Power Supply
Slam Strike for Right Hinge Door, Black
Slam Strike for Left Hinge Door, Black
CompX 8102 Disc & Tumbler Cam Lock for 3/4" Material, Keyed Alike # 103, 3/4" Diameter Drilling Required, Dull Chrome
CompX 8102 Disc & Tumbler Cam Lock for 3/4" Material, Keyed Alike # 915, 3/4" Diameter Drilling Required, Dull Chrome
CompX 8108 Disc & Tumbler Cam Lock for 1-3/8" Material, Keyed Alike # 915, 3/4" Diameter Drilling Required, Dull Chrome
CompX 8043 Dull Chrome Bypass Cam Lock for 7/8" Material, Keyed Alike # 413, 7/8" Diameter Drilling Required
CompX 8043 Dull Chrome Bypass Cam Lock for 7/8" Material, Keyed Alike # 415, 7/8" Diameter Drilling Required
CompX 8055 Disc & Tumbler Cam Lock, 90 Degree Cam Turn, Flush/Lipped/Overlay, 1-7/16" Cylinder Length, 1-1/8" Max. Door Thickness, Keyed Alike, 3/4" Mounting Hole, Master Keyed #346, Bright Nickel
CompX 8704 Disc & Tumbler Cam Lock, 90 Degree Cam Turn, Flush or Lipped/Overlay, 1-1/2" Cylinder Length, 5/8" Material, Keyed Alike, 3/4" Mounting Hole, Master Keyed #413, Bright Nickel
CompX 8173 Dull Chrome Cabinet Door Lock, Keyed Alike, 7/8" Cylinder Length, 15/16" Mounting Hole Diameter, Master Key #101
CompX 8173 Dull Chrome Cabinet Door Lock, Keyed Alike, 7/8" Cylinder Length, 15/16" Mounting Hole Diameter, Master Key #915