Solid Wood Tambour and Face Frame Appliance Garage Kit for 24 x 24 Inch Cross Corner Wall Cabinet including Spring Tension Track and End Panels, 18-1/2 Height, Unfinished Alder

  Rating 4.4 | 135 Reviews in the past 24 months | Our Item Number ONP-AG100CSAL

Create a storage area for your appliances that matches your existing wood cabinets. These appliance garage kits complete with door and track and are easily installed.

$
230.49 Set
$280.99
SAVE 18%
Ends Jun 12
$15 Off Ground Shipping for Organizers - Orders $99+
Use Code ORGSHIPDISCOUNT2606 Expires 6/30/2026

Finish: Unfinished Alder
Unfinished Alder Unfinished Cherry Unfinished Hickory Unfinished Maple Unfinished Red Oak

Need Help? Contact Us Now
Product Info Depth: 11-7/8", Height: 18-1/2", Width: 17", Corner Width: 24 Inch, See more product details
Qty:       Set
 

Large Project?

Orders $2500+ Qualify for Special Discounts.

Build your item list and get a Quick Quote

view bid cart

All the product info you could ask for...

  • Size Info

  • Depth : 11-7/8"
  • Height : 18-1/2"
  • Width : 17"
  • Corner Width : 24 Inch
  • Other Important Info

  • Material : 3/8" MDF With Veneer Facing & Backing
  • Notes : Kit includes solid wood tambour door, end panels and Hoffco Spring Tension Track System
  • Product Type : Corner Appliance Garage
  • Wood Species : Unfinished Alder
  • Door Type : Solid Wood Tambour Door
  • Manufacturer Resources

Our customers say Omega National Products products...

  4.4 out of 5
based on 135 ratings

"These reviews are from our customers who have purchased Omega National Products products."
  • 2 of 2 people found the following review helpful
    4 of 5 Doesn't look like an addition. February 21st, 2024
    by Cynthia from Saginaw, MI

    Super happy with construction and instructions. Looks like it was part of original construction, not an after thought 20 years later.

    This review is about a different size/color of this item. (ONP-AG100CSR)

    Was this review helpful? yes no

  • 2 of 2 people found the following review helpful
    3 of 5 I'm not drilling into my granite counter top August 7th, 2019
    by Cary from Quakertown, PA

    Little disappointed. One of the first steps is to cut the notch in the side panels for the back splash and the unit ended up being recessed under the cabinet by the same distance. I should have waited until test fitting. Nothing for my set up went per the instructions, but it all looks fine in the end. Instructions say the side walls get held in place by drilling holes into the counter top for the cleats on the base of the side panels to be screwed down. That ain't happening dude. After gluing the front panel to the side panels while in position, I carefully used clear caulking around the outside of whole unit except the joints connecting the side panels to the front. Added some dobs of caulking on the inside where the panels contacted the cabinet. Unit is nice and solid in place.

    This review is about a different size/color of this item. (ONP-AG100CSC)

    Was this review helpful? yes no

  • 2 of 2 people found the following review helpful
    4 of 5 Installation Critique September 3rd, 2018
    by Sandro from Kernersville, NC

    Read the installation instructions carefully. Accurately measure before making any cuts. Take your time and enjoy a finished add-on product that looks like it was part of your original built-in kitchen cabinets.

    This review is about a different size/color of this item. (ONP-AG100CSR)

    Was this review helpful? yes no

  • 2 of 2 people found the following review helpful
    4 of 5 24" Corner Appliance Garage-Maple August 20th, 2016
    by Shirley from Lincoln, NE

    The product itself is of expected quality but unfortunately their measurements did not match what was advertised. Instead of 17" width it was 16 13/16th"and sides were 11" instead of 11 7/8". Doesn't sound like much but the lines going down to counter would have been off and not acceptable and sides would not have reached to back tile. I kept it because in hurry to use and am paying carpenter to use just the tambour door and he is building the rest. Customer service good but it was what it was. They would have taken back and NOT charged restocking or shipping.

    This review is about a different size/color of this item. (ONP-AG100CSM)

    Was this review helpful? yes no

  • 1 of 1 people found the following review helpful
    5 of 5 Identical to old garage February 2nd, 2020
    by Dave from Sheboygan, WI

    I had to demo the existing appliance garage during countertop replacement. This is the identical item, shipped unassembled. Quality of the wood is great, the tambour door operates smoothly and the joints on the face are tight. A very light sanding is all that is needed before staining and topcoat. Thanks to the service agent for checking that this unit was indeed unassembled. I appreciate it.

    This review is about a different size/color of this item. (ONP-AG100CSR)

    Was this review helpful? yes no

See More Reviews

Reviews about us...

  • 5 of 5 | June 1st, 2026

    They went above and beyond to replace items damaged in shipping.

  • 5 of 5 | June 1st, 2026

    Everything came as ordered. No issues with the quality of the finish or the mechanics of the hardware.

  • 5 of 5 | June 1st, 2026

    The hinges I purchases worked great just one or two minor adjustment to my doors and insatallayionnwas simple.

  • 4 of 5 | May 31st, 2026

    Initially there was a problem with the quantity of items delivered, but they promptly responded and I received my full order.

  • 5 of 5 | May 31st, 2026

    Ordered surface mounted hinges for a bathroom renovation project. CabinetParts has a wide selection, price was fair and shipment arrived in just a couple days. Well satisfied with the results.

See More Reviews
×