Organizers Closet Organizers Clothing Rods/Racks CVRI Insert Valet Rod Series by Rev-A-Shelf
Loading from Primary Photo

Clearance Sale, Insert Valet Rod-Oil Rubbed Bronze

Product Discontinuation AlertThis item has left our catalog. It's either upgraded to a newer model, didn't meet our high customer satisfaction standards, or the manufacturer said goodbye. But don't worry, CabinetParts is always here with top-notch alternatives.


All the product info you could ask for...

  • Size Info

  • Feature 1 : Minimum drill depth is 7'
  • Feature 2 : Highly Recommended to use drill guide (CVRI-DG) sold seperately
  • Depth : 3.74 Inch
  • All Features : Included: (1) Oil Rubbed Bronze rod and mounting hardware
    Minimum drill depth is 7'
    Highly Recommended to use drill guide (CVRI-DG) sold seperately
    Optional installation drill guide available (CVRI-DG sold separately)
    Construction: Heavy gauge painted metal wire construction
    Limited Lifetime Warranty
    Image shown is Satin Nickel. Actual product is Oil Rubbed Bronze.
  • Width : 0.5 Inch
  • Height : 0.5 Inch
  • Full Product Dimensions (Millimeters) : 12.7 mm W x 95.25 mm D x 12.7 mm H

  • Manufacturer Info

  • Manufacturer : Rev-A-Shelf
  • Manufacturer Part # : CVRI-7-ORB

  • Other Important Info

  • Material Bre : Steel;
  • Includes : (1) Oil Rubbed Bronze rod and mounting hardware
  • Optional Accessories : Optional installation drill guide available (CVRI-DG sold separately)
  • Warranty : Limited Lifetime Warranty
  • Image Disclaimer : Image shown is Satin Nickel. Actual product is Oil Rubbed Bronze.
  • Slides : No
  • Key Features : Removable knob allows you to customize to match your existing hardware
  • Material : Steel
  • Product Finish : Oil Rubbed Bronze
  • Product Type : Valet Rods
  • Sold : Each
  • Category Groupings : Closet Valet Insert
  • Sub-Class : Closet
  • Ship Type : Small Parcel
  • Keywords : Closet, Laundry, Hanging, Valet Rods, Hooks
  • Notes : Warning: This unit requires that you mortise it into the side of your closet panel. It does not include a mounting bracket.
  • Actual Product Width (Inches) : 0.5
  • Actual Product Depth (Inches) : 3.75
  • Actual Product Height (Inches) : 0.5
  • Actual Product Weight (lbs) : 0.5
  • Minimum Cabinet Frameless Opening (Inches) : 0.65
  • Actual Product Width (Millimeters) : 12.7
  • Actual Product Depth (Millimeters) : 95.25
  • Actual Product Height (Millimeters) : 12.7
  • Weight : 0.498 lbs
  • Full Product Dimensions : 0.5"W x 3.75"D x 0.5"H
  • Actual Product Weight (Kilograms) : 0.225
  • Product Series : C17 - Valet
  • Minimum Cabinet Faceframe Opening (Millimeters) : 19.05
  • Color : Oil Rubbed Bronze
  • Minimum Cabinet Frameless Opening (Millimeter) : 16.51
  • Country of Origin : China
  • Primary Color : Oil Rubbed Bronze
  • Contains Wood : No
  • Soft Close : No
  • Material Breakdown : Steel;
  • Gas Assist : No
  • Material Breakdown % : 100;
  • Shipping and Return Info : This item is a clearance item, and no returns are allowed.

  • Manufacturer Resources

Back to Top
back to top

Our customers say Rev-A-Shelf products...

  4.5 out of 5
based on 35 ratings

"These reviews are from our customers who have purchased Rev-A-Shelf products."
  • 1 of 1 people found the following review helpful
    5 of 5 Perfect February 24th, 2009
    by Donald Bruce from Carmichael, CA

    A very creative product. Both the drilling jig for placement of the rod was easy to use and the quality of the valet rod worked well in my door and wall installation. Good value...would recommend

    This review is about a different size/color of this item. (RVCVRI7CR)

    Was this review helpful? yes no

  • 8 of 9 people found the following review helpful
    4 of 5 That's good stuff January 31st, 2013
    by Laurie from Tarzana, CA

    This will work well for us in our warehouse. Please note that our general contractor had to make a wood platform to install on because these do not install to the back wall. It installs on the sides.

    This review is about similar Rev-A-Shelf Organizers. (RVCPDR-3548)

    Was this review helpful? yes no

  • 4 of 6 people found the following review helpful
    3 of 5 Average, Ordinary November 30th, 2010
    by randy from Cypress, TX

    Not as pictured. It attaches to sides only.

    This review is about similar Rev-A-Shelf Organizers. (RVCPDR-3548)

    Was this review helpful? yes no

  • 3 of 3 people found the following review helpful
    4 of 5 BEST LOOKING PRODUCT February 21st, 2022
    by BRUCE from ORMOND BEACH, FL

    Classy product. I would have given a 5 star rating however screws are too short (in my opinion) to support hanging clothes. Had to use my own screws. A product of this quality should also have quality (longer) screws.

    This review is about similar Rev-A-Shelf Organizers. (RV-CLVSL-CR-1)

    Was this review helpful? yes no

  • 3 of 3 people found the following review helpful
    4 of 5 That's good stuff April 26th, 2011
    by Steve from Little Rock, AR

    This product performed exactly as expexted...and fairly easy to install. Good price and very good quality. Much more robust than the photo suggest.

    This review is about similar Rev-A-Shelf Organizers. (RVCPDR-3548)

    Was this review helpful? yes no

See More Reviews

Reviews about us...

  • 5 of 5 | July 29th, 2026

    Shipping was fast and I love the pulls! They matched with my existing knobs and gave me the look I was going for.

  • 5 of 5 | July 28th, 2026

    Purchase and delivery were easy and fast.

  • 5 of 5 | July 28th, 2026

    I realized they had sent a different part for one of my under mount latches. I called them and they sent the replacement part in just a couple of days.

  • 5 of 5 | July 28th, 2026

    Easy to install. They were heavier (150#) than the originals(100#) installed in 2006. Very easy to pull. Excellent. W. O. B.

  • 5 of 5 | July 27th, 2026

    Jonzee did a great job identifying the correct replacement hinges. The original design on the hinges is no longer available. The new replacement hinges required drilling new holes for the screws and routing out the 35MM hole to allow the hinge to open the

See More Reviews
Back to Top
back to top
×