Soft-Close 2-Bin Vanity Height Pullout Organizer for Minimum Cabinet Opening: 9" Width x 19-1/8" Depth x 20-3/8" Height, Bottom and Side Mount, Clearcoat Wood Finish
Product Discontinuation AlertThis item has left our catalog. It's either upgraded to a newer model, didn't meet our high customer satisfaction standards, or the manufacturer said goodbye. But don't worry, CabinetParts is always here with top-notch alternatives.All the product info you could ask for...
-
Size Info
- Slide Length : 18"
- Minimum Cabinet Opening Width : 8.125"
- Minimum Cabinet Opening Depth : 19.125"
- Minimum Cabinet Opening Height : 20.375"
- Full Product Dimensions (Millimeters) : 214.376 mm W x 496.824 mm D x 517.652 mm H
- Minimum Opening for a Face Frame Cabinet : 9" Width x 19-1/8" Depth x 20-3/8" Height
- Minimum Opening for a Frameless Cabinet : 9" Width x 19-1/4" Depth x 20-3/8" Height
- Minimum Opening for a Frameless Inset Cabinet : Add 3/4 inch to depth of the "Minimum Opening for a Frameless Cabinet"
- Key Features : For vanity height cabinets
Includes stainless steel bins
Perfect for storing curling irons & hair dryers - Width : 8 Inch
- Depth : 19 Inch
- Height : 20.25 Inch
-
Manufacturer Info
- Manufacturer : Rev-A-Shelf
- Manufacturer Part # : 445-VCG20-8
-
Other Important Info
- Mounting Type : Bottom Mount
- Category Groupings : Vanity Organizer w/Ball-Bearing Slides
- Sub-Class : Vanity Base Cabinet
- Ship Type : Small Parcel
- Keywords : Vanity, Cabinet Organization
- All Features : Included: (1) Wood Organizer with (2) Stainless Steel bins and mounting hardware
Slide Type: 100lb Full-Extension Ball-Bearing Slides
Adjustable shelves and bins perfect for curling irons and hair dryers
Designed for a 9" opening
Door mount brackets: Adjustable door mount bracket that are included and required for operation
Construction: Fully Assembled Maple Wood construction with a clear coat finish for durabiltiy
Comes fully assembled and ready to install
Limited Lifetime Warranty - Actual Product Width (Inches) : 8.44
- Actual Product Depth (Inches) : 19.56
- Actual Product Height (Inches) : 20.38
- Actual Product Weight (lbs) : 18.7
- Minimum Cabinet Frameless Opening (Inches) : 8.15
- Actual Product Width (Millimeters) : 214.376
- Actual Product Depth (Millimeters) : 496.824
- Actual Product Height (Millimeters) : 517.652
- Actual Product Weight (Kilograms) : 8.415
- Minimum Cabinet Faceframe Opening (Millimeters) : 215.9
- Minimum Cabinet Frameless Opening (Millimeter) : 207.01
- Primary Color : Natural
- Soft Close : No
- Gas Assist : No
- Material Bre : Maple Wood; Steel;Plastic
- Weight : 18.69 lbs
- Full Product Dimensions : 8.44"W x 19.56"D x 20.38"H
- Product Series : V4 - 445 Org
- Size : 8" W x 19" D x 20.25" H
- Color : Natural
- Country of Origin : China
- Contains Wood : Yes
- Material Breakdown : Maple Wood; Steel;Plastic
- Material Breakdown % : 80;15;5
- Wood Type : Maple
- Includes : (1) Wood Organizer with (2) Stainless Steel bins and mounting hardware
- Slide Type : 100lb Full-Extension Ball-Bearing slide system
- Feature 3 : Adjustable shelves and bins perfect for curling irons and hair dryers
- Fits or Designed for : Designed for a 9" opening
- Included optional Door Mount / Door Extender : Includes patented door mount brackets for up to 5" of adjustability (US Patent #: 7,204,569)
- Construction / Finish : Attractive wood construction with durable clear finish
- Installation : Comes fully assembled and ready to install
- Warranty : Limited Lifetime Warranty
- Slides : Yes
- Product Type : Vanity Organizers
- Sold : Each
- Material : Wood
- Product Finish : Natural
- Weight Capacity : 100 lbs
- Extension : Full Extension
Manufacturer Resources
-
Helpful Videos
-
Installation Help (2)
Other - 445 Series Grooming Organizer by Rev-A-Shelf
Our customers say Rev-A-Shelf products...
based on 453 ratings
- 3 of 5 A bit hard to use July 14th, 2026
by Olivia from BROOKLYN, NYThis is mostly good. But I bought it to hold baking pans, and the 2 side rows are sub divided by these black grabby dividers that are REALLY hard to remove- like unnecessarily difficult. I haven't been able to remove them. I use it for tinfoil stored vertically and pans, but I really only need one row of tinfoil so gonna try to move the black grabbies with pliers? Not sure if it's even possible. Wish it was more modular/customizable.
This review is about similar Rev-A-Shelf Organizers. (RV-447-BCSC-9C)
- 1 of 5 DO NOT BUY July 14th, 2026
by Olivia from BROOKLYN, NYThis is a completely illogical pull out kit. The bottom 2 shelves are wide and very hard to access. The demo pic is even a bit odd? It shows some small/short tupperware containers, I'm not sure what is meant to be stored in there. The top shelf is too short for oils/sugar, but too narrow for spices in 2 lines, plus you would have to label your spices on top? But then the lower shelves can't fit spices. I bought this because I wanted to use the full width of our pull out cabinet with a different shelf, but I really regret it. Ultimately, I ended up storing ziploc containers in here? but not even all the shelves are full.
This review is about similar Rev-A-Shelf Organizers. (RV-448-BDDSC-5C)
- 1 of 5 Customer service is a disgrace!! June 17th, 2026
by Kevin from Levittown, PAYou can take my money in a matter of seconds but can’t respond to a customer that needs help!! I will NEVER PURCHASE from cabinetparts ever again.
This review is about similar Rev-A-Shelf Organizers. (RV-448UT-BCSC-6C)
- 1 of 5 Customer service is a disgrace!! June 17th, 2026
by Kevin from Levittown, PAYou can take my money in a matter of seconds but can’t respond to a customer that needs help!! I will NEVER PURCHASE from cabinetparts ever again.
This review is about similar Rev-A-Shelf Organizers. (RV-448UT-BCSC-6C)
- 1 of 5 Customer service is a disgrace!! June 17th, 2026
by Kevin from Levittown, PAYou can take my money in a matter of seconds but can’t respond to a customer that needs help!! I will NEVER PURCHASE from cabinetparts ever again.
This review is about similar Rev-A-Shelf Organizers. (RV-448UT-BCSC-6C)
Reviews about us...
- 5 of 5 | July 29th, 2026
Shipping was fast and I love the pulls! They matched with my existing knobs and gave me the look I was going for.
- 5 of 5 | July 28th, 2026
Purchase and delivery were easy and fast.
- 5 of 5 | July 28th, 2026
I realized they had sent a different part for one of my under mount latches. I called them and they sent the replacement part in just a couple of days.
- 5 of 5 | July 28th, 2026
Easy to install. They were heavier (150#) than the originals(100#) installed in 2006. Very easy to pull. Excellent. W. O. B.
- 5 of 5 | July 27th, 2026
Jonzee did a great job identifying the correct replacement hinges. The original design on the hinges is no longer available. The new replacement hinges required drilling new holes for the screws and routing out the 35MM hole to allow the hinge to open the
Soft-Close 2-Bin Vanity Height Pullout Organizer for Minimum Cabinet Opening: 8-1/2" Width x 19-5/8" Depth x 20-3/4" Height, Bottom and Side Mount, Clearcoat Wood Finish
Soft-Close 2-Bin Vanity Height Pullout Organizer for Minimum Cabinet Opening: 9" Width x 19-1/8" Depth x 25-5/8" Height, Bottom Mount, Clearcoat Wood Finish
Soft-Close 2-Bin Vanity Height Pullout Organizer for Minimum Cabinet Opening: 8-1/2" Width x 19-5/8" Depth x 25-3/4" Height, Bottom Mount, Clearcoat Wood Finish
Soft-Close 2-Bin Vanity Height Pullout Organizer for Minimum Cabinet Opening: 9" Width x 19-1/8" Depth x 20-3/8" Height, Bottom and Side Mount, Clearcoat Wood Finish