Face Frame Adapter Baseplate 7.3mm Height
Product Discontinuation AlertThis item has left our catalog. It's either upgraded to a newer model, didn't meet our high customer satisfaction standards, or the manufacturer said goodbye. But don't worry, CabinetParts is always here with top-notch alternatives.See Newer Models
All the product info you could ask for...
-
Size Info
- Height : 7.3MM
-
Manufacturer Info
- Manufacturer Part # : 13160
- Manufacturer : Grass
-
Other Important Info
- Product Type : Mounting Plate: European
- Includes : (1) Mounting Plate
- Mounting Type : Screw On
- Material : Zinc Die-Cast
- Product Finish : Zinc Die-Cast
Manufacturer Resources
-
Helpful Videos
-
How to Measure Your Cabinet Door Overlay -
How to Install and Adjust a Grass 3000 Series H
Installation Hardware
Other - Grass European Hinge Mounting Plates
Our customers say Grass products...
based on 15 ratings
- 5 of 5 Easy to find and the right fit August 25th, 2026
by Mario from Columbus, WII thought finding the right hinge plate would be a hassle, but it took almost no time to find the right plate. It fit exactly the way it should when I installed it. The next time a hinge breaks, I know where to go!
This review is about similar Grass Hinges. (GHA346.290.91.0015)
- 2 of 5 Close, but no cigar August 25th, 2026
by James from Saugus, MAI purchased this item as the recommended replacement for an older model, but when I tried to use it, I found that it didn't quite fit. I will perform some minor metalwork on it to make do with it, but as a drop-in replacement, it's close, but no cigar.
This review is about similar Grass Hinges. (GHA58139746)
- 1 of 5 Flush mount is not flush August 20th, 2026
by Edward from Marysville, PATried the "flush mount" bracket. It was over a half inch off. Glad I only bought 1. Shipping cost more than the bracket
This review is about similar Grass Hinges. (GHA315.393.55.1815)
- 5 of 5 Very good July 16th, 2026
by Stefano from Coral Springs, FLas if nothing had happened I repalced and ready to use again
This review is about similar Grass Hinges. (GHA58139746)
- 4 of 5 Part 2 of 2 June 24th, 2026
by Robert from Williamsport, PAI was a bit concerned when I first started this project. Our existing cabinet hinges are over 25 years old, installed during our original kitchen remodel, and we had no original documentation for reference. The support team was excellent; they guided me through taking the necessary measurements and photos, and ultimately, they identified the perfect replacements. The hinges fit perfectly without the need for any additional drilling or adjustments. Thank you for the great support!
This review is about similar Grass Hinges. (GHA58139746)
Reviews about us...
- 5 of 5 | September 8th, 2026
I needed a hinge, found it on your website, ordered it, received it a few days later, installed it, Thank you.
- 5 of 5 | September 8th, 2026
After you shipped my order promptly it got lost during shipping. All tracking from FedEx just stopped in the middle of the shipping. After trying to contact FedEx for help with little luck my wife reached out to you folks. I am very sorry I don’t remember
- 5 of 5 | September 8th, 2026
Exactly what we were looking for. Quality is great, fast shipping.
- 5 of 5 | September 8th, 2026
I had to return the part due to it being the wrong size. I will reorder a new part
- 4 of 5 | September 8th, 2026
Would have given a five star except screws that are sold along with drawer slides are shipped from a different location, presumably by a third party retailer. Tracking says shipped by USPostal Service which is slow and unreliable lately. Been 2 weeks and
#6 x 5/8 inch Flat Head Hinge Screws (25 Pack)
Grass Pozi Drive Screwdriver
Professional Self-Centering Vix Bit, Essential Drill Bit for Hinge Installation
Nexis 2 Point Fixing Cam Frameless Mounting Plate 0MM Height
Nexis Face Frame Cam Mounting Plate 0MM Height
Nexis 2 Piece Frameless Screw On Mounting Plate 0MM Height
Nexis Face Frame Cam Screw On Mounting Plate 2MM Height
Nexis Face Frame Cam Mounting Plate 4MM Height
Nexis Face Frame Screw On Mounting Plate 0MM Height
Nexis Face Frame Screw On Mounting Plate 4MM Height
Nexis 2-Point Fixing Cam Mounting Plate 4MM Height
Nexis 3-Point Fixing Cam Frameless Mounting Plate 8MM Height
Nexis 2 Piece Screw On Mounting Plate 18MM Height
3.5 mm Tiomos Wing Frameless Mounting Plate, 4 Point Fixing with 13.5 mm Pre-Mounted Euro Screws
0 mm Tiomos Wing Frameless Mounting Plate, 4 Point Fixing with 13.5 mm Pre-Mounted Euro Screws
Nexis 2-Point Fixing Cam Frameless Mounting Plate 2MM Height
Nexis 2 Piece Screw On Frameless Mounting Plate 2MM Height
Nexis 2 Point Fixing Cam Mounting Plate 2MM Height
Nexis 2-Point Fixing Cam Frameless Mounting Plate 0MM Height
2 mm Tiomos Wing Frameless Base Plate, 4 Point Fixing with 13.5 mm Pre-Mounted Euro Screws
3 mm Tiomos Wing Frameless Mounting Plate, 4 Point Fixing with 13.5 mm Pre-Mounted Euro Screws
Nexis 3 Point Fixing Cam Frameless Mounting Plate 4MM Height
Nexis Cam Euro Screw Frameless Mounting Plate 0MM Height
Nexis Cam Euro Screw Frameless Mounting Plate 2MM Height
0 mm Tiomos Wing Frameless Mounting Plate, 4 Point Fixing with 10 mm Pre-Mounted Euro Screws For Twin Application
Nexis 3 Point Fixing Cam Frameless Mounting Plate 2MM Height
3 mm Tiomos Wing Frameless Mounting Plate, 4 Point Fixing with 10 mm Pre-Mounted Euro Screws For Twin Application
Tiomos Screw on Wing Frameless Mounting Plate 0MM Height
Tiomos Screw on Wing Frameless Mounting Plate 3MM Height
Tiomos Face Frame Adapter Plate 1.5MM Height
Tiomos Screw on Wing Frameless Mounting Plate 12MM Height
Tiomos Screw on Wing Frameless Mounting Plate 19MM Height
Tiomos Face Frame Adapter Plate 3.5MM Height
Tiomos Face Frame Adapter Plate 3.5MM Height with Lip
Tiomos Face Frame Inset Mounting Plate for Wood Screws, Full-Inset Door when used with Tiomos Partial Overlay Hinge , Nickel
Tiomos Screw on Wing Frameless Mounting Plate 9.5MM Height
Nexis Cam Screw On Frameless Mounting Plate 0MM Height
Face Frame Adapter Baseplate with Lip 2.6MM Height
Wing Baseplate 1.3MM Height
Wing Baseplate 4.3MM Height
Wing Baseplate 9.3MM Height
Wing Baseplate 12.3MM Height
Wing Baseplate 20.3MM Height
Face Frame Adapter Baseplate 4.3MM Height
Face Frame Adapter Baseplate 7.3mm Height
Wing Baseplate with Euro-Screw 1.3MM Height
Wing Baseplate with Euro-Screw 4.3MM Height
Straight Baseplate 1.3MM Height
2 mm Tiomos Wing Frameless Mounting Plate, 4 Point Fixing with 10 mm Pre-Mounted Euro Screws For Twin Applicaiton
3.5 mm Tiomos Wing Frameless Mounting Plate, 4 Point Fixing with 10 mm Pre-Mounted Euro Screws For Twin Application
2 Piece Height Adjustable Frameless Mounting Plate, 3 Point Fixing with 18 mm Height Adjustment