2-1/2 x 1-3/4 Inch Five Knuckle Mortised Butt HInge, Polished Nickel
Our Item Number VMO-60-2517-618
This five knuckle, loose pin, solid extruded mortise cabinet hinge is of the highest quality construction from Von Morris by Eric Morris & Company
$
53.77
$57.82
SAVE 7%
Ends Jun 30
Ends Jun 30
Finish: Polished Nickel
Product Info Hinge Thickness: 0.08 Inch, Screw size: #6 x 3/4 Inch, Product Finish: Nickel, Style: Mortise, Bearing: Plain Bearing, See more product details
Large Project?
Orders $2500+ Qualify for Special Discounts.
Build your item list and get a Quick Quote
view bid cartAll the product info you could ask for...
-
Size Info
- Hinge Width (height) : 2-1/2 Inch
- Overall Width (Height) : 3-1/8 Inch
- Hinge Length (width) : 1-3/4 Inch
- Hinge Thickness : 0.08 Inch
- Screw size : #6 x 3/4 Inch
-
Manufacturer Info
- Manufacturer Finish : Polished Nickel
- Manufacturer : Von Morris
- Manufacturer Part # : 60-2517-618
-
Other Important Info
- Product Finish : Nickel
- Style : Mortise
- Material : Solid Forged Brass
- Bearing : Plain Bearing
- Key Features : Classic Design with Ball Finial
Cabinet hinges may be enhanced with Urn or Flat Finials
All finials are threaded into the barrel of the hinge to prevent the pin from rising.
All finials are sized to match the diameter of the hinge barrels to which they are mounted.
Hinges are individually hand polished assuring an even finish with no unpolished areas. Von Morris extruded hinges are available in over 30 standard finishes - Hinge Body : Hinge body is manufactured from CDA alloy 38500 brass. It is machined from an extruded bar, resulting in a hinge with high strength and precision tolerances. The hinges are beveled at the barrel to provide a close fit when the hinge is both open and closed.
- Pin Type : Pins are machined from 304 series Stainless Steel for high durability and resistance to rust. One end is rounded to facilitate re-assembly, while the other end is knurled to keep the pin from dropping through the hinge barrel during re-assembly. The pin is held in place by the threaded finials and can be easily removed by unthreading the finials and tapping the pin up from the bottom.
- Screw Type : All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged either four per bag or six per bag to facilitate sales of half pairs.
- Includes Screws : Yes
- Filials : Cabinet hinges come with threaded ball finials installed. Other finials are available, packed in sets of four.
- Installation Type : Screw
- Hinge Mount : Inset
- Overlay : Inset
- Soft Close : No
- Self Close : No
- Cabinet Type : Faceframe & Frameless
- Demountable : Yes
- 3-Way Adjustable : No
- Number of Holes : 6
- Number of Knuckles : 5
- Product Type : Mortised Butt Hinge
Manufacturer Resources
2-1/2 x 1-3/4 Inch Five Knuckle Mortised Butt HInge, Oil Rubbed Bronze 
2-1/2 x 1-3/4 Inch Five Knuckle Mortised Butt HInge, Polished Nickel 
2-1/2 x 1-3/4 Inch Five Knuckle Mortised Butt Hinge, Satin Nickel 
Reviews about our customers experience
"These reviews are from our Customers who have purchased these products."
- 5 of 5 | June 19th, 2026
Ordered the wrong parts and they were great fixing my issue. Will be my go to from now till on
- 5 of 5 | June 19th, 2026
Good service. Had parts i needed in couple of days.
- 5 of 5 | June 19th, 2026
Tried finding the hinges elsewhere. Found them right away. Perfect match.
- 4 of 5 | June 18th, 2026
I was able to find the exact hinge needed to replace broken hidden Soss hinges in a Martha Washington cabinet. The price was reasonable. It did take a while to ship out (ordered May 15, shipping notice June 2) but then arrived quickly once shipped.
- 5 of 5 | June 18th, 2026
I have looked and looked for replacement parts for my cabinets and was about to give up hope, but thankfully they had the exact parts I needed. They arrived quickly, reasonably priced and I am thrilled.
× ![]()
Pinterest
Twitter
YouTube
Facebook