110 Degree Full Overlay Self Close Dowel Mounting Mod 17 Hinge
Ends Oct 07
Save more! Buy a Pro Pack.
Large Project?
Orders $2500+ Qualify for Special Discounts.
Build your item list and get a Quick Quote
view bid cartAll the product info you could ask for...
-
Size Info
- Adjustment : Side adjustment from -1.5 to +4.5 mm
Height adjustment from -2 to +2 mm
Depth adjustment with Duomatic A mounting plates +2.8 mm, with Duomatic SM mounting plates from -0.5 to 2.8 mm - Tab : 3 - 6 mm
-
Manufacturer Info
- Manufacturer : Salice
- Manufacturer Part # : C2R6A99
-
Other Important Info
- Drilling depth : Hinge cup 11
- Finish : Nickel plated
- For door thickness : (5/8 - 1") 16 - 26
- Installation : hinge attaches to door without tools
- Material : Steel cup and hinge arm
- Overlay : Full Overlay
- Product Type : Long Arm Hinge
- Installation Note : Includes dowels for 3-hole pre-bore; remove for screw-on. #6 × 5/8" flat-head screws required.
Manufacturer Resources
If Measured Overlay is 18-19MM (11/16"-3/4") use these Mounting Plates for Frameless Applications
If Measured Overlay is 16-17MM (5/8"-11/16") use these Mounting Plates for Frameless Applications
Other - Frameless Cabinet Hinges by Salice
Our customers say Salice products...
based on 550 ratings
- 1 of 5 Did not fit cabinet May 21st, 2026
by Vikram from Newark, CAI asked if this is going to fit my cabinet and was told it will be a perfect match - alas when it came it did not fit
- 1 of 2 people found the following review helpful
5 of 5 Direct replacement fit for my old Hinge for cabinet door February 1st, 2021
by joseph from Staten Island, NYEasy to install ,just had to swap out my old hinge and screw this new one in
- 1 of 2 people found the following review helpful
4 of 5 Closing the gap May 10th, 2020
by Tamer from Fairfield, CAI do have a concern. This is not so much a review, but rather a question, The hinges I bought creates a gab between the two cabinet doors and by the trim. Looks like a few teeth are missing. Is there a similar hindhe that allows a bit more movement or sits in a manner that closes that gap? Thank you for your help! Tamer Tamertotah@gmail.com
- 5 of 5 As advertised and easy to install September 21st, 2022
by Michael from Gulf Breeze, FLProduct came as advertised and was a perfect fit. It was easy to install with the instructions provided.
- 5 of 5 It works now April 5th, 2022
by Lotte from Woodmere, NYMy 30 year old kitchen cabinet wasn't closing properly and my son-in-law bought 2 new hinges at Home Depot. Well, the doors actually were even more misaligned than before. I researched and found the proper hinges at "Cabinet Parts", ordered them and when they were properly installed the doors worked perfectly. I needed the the correct overlay hinges.
Reviews about us...
- 5 of 5 | September 29th, 2026
They had the replacement part and delivered it quickly. Very happy with Cabinet Parts.
- 4 of 5 | September 28th, 2026
I love the heft and look of the bronze plates. My only concern is with the mounting screws. For such a large plate and for security matters the screws are only 1/2 inch long. They would be easy to pry off. I have bought 1 inch screws, (the longest that wo
- 4 of 5 | September 27th, 2026
we had significant difficulty deciphering the measurements needed. Cabinet parts develop drawings to illustrate the needed dimensions.
- 5 of 5 | September 27th, 2026
And fast shipping . Thank you!
- 5 of 5 | September 26th, 2026
I’ve been looking for these parts and you delivered! Thanks
Salice 0mm Height Frameless Clip Wing Mounting Plate for Screw Mounting, Mod 29
Salice 2mm Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 0mm Frameless Wing Mounting Plate with Pre-Mounted Anchors and Screws , Nickel Plated Steel
Salice 0mm Clip Frameless Mounting Plate For Woodscrew Mounting, Nickel Plated
Salice 0mm Frameless Wing Mounting Plate for Screw-On Mounting, Nickel Plated Steel
Salice 0mm Frameless Concealed Mounting Plate for Screw-On Mounting , Nickel Plated Steel
Cruciform Slide-On Frameless Mounting Plate For Woodscrews 0mm Mod 2, Nickel
Salice 2mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 3mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
94 Degree +45 Degree Corner Self Close Screw-On Hinge, Nickel
Salice Push-To-Open Full Overlay 165 Degree Opening Hinge for Dowel (3-Hole) Mounting, Touch-to-Open (Touch-Latch) Device Additionally Required
Salice 0mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
155 Degree Full Overlay Zero Protrusion/Thick Door Self Close Dowel Hinge
Concertina Bi-Fold Hinge for Cabinet Bi-Fold Sliding Wood Door Systems, Use with Sliding Block
110 Degree Full Overlay Self Close Dowel Mounting Mod 17 Hinge
Silentia+ 105 Degree Inset +/- Switch, Screw-On Hinge, Nickel
Salice Silentia 105 degree Soft-Close 1/2 Inch Overlay Hinge for Dowel Mounting, Adjustable +/- Closing Speed, Nickel Plated
Salice 3mm Height Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice Push-To-Open Full Overlay 110 Degree Opening Hinge for Wood Screw Mounting, Touch-to-Open (Touch-Latch) Device Additionally Required , Nickel
105 Degree Full Overlay Self Close Screw-On Mod 17 Hinge, Nickel
Salice 12mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
165 Degree Hinge 1/2 Inch Overlay Self Close Dowel Mounting Mod 12 Hinge
110 Degree Full Overlay Self Closing Logica Mounting Hinge, Nickel
Salice 6mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 18mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Cover Cap Hinge Arm For Duomatic Concealed Hinges Without Logo, Nickel
Salice Silentia 105-degree Soft-Close Partial 1/4 to 3/8 Inch Overlay Hinge for Screw-On Mounting, Nickel Plated
Single 8mm Replacement Dowel for 3-Hole Hinge Drilling, Plastic
Salice Push-To-Open Full Inset 165 Degree Opening Hinge for Dowel (3-Hole) Mounting, Touch-to-Open (Touch-Latch) Device Additionally Required, Nickel
Flange Cover Cap For Duomatic Concealed Hinges, Nickel Plated
Salice Mod17 Zero Protrusion Thick Door Full Overlay Self-Close 155 Degree Opening Hinge for Screw Installation, Nickel
Salice 6mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
110 Degree Full Overlay with Rapido Mounting Hinge, Nickel
270 Degree Full Overlay Self Close Screw-On Institutional Hinge, Nickel Plated
3mm Frameless Clip Mounting Plate For Woodscrews Mod 5, Nickel
Salice 9mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 12mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice Silentia 1/2" Overlay Soft-Closing Face Frame Hinge for Dowel Mounting, 2-Hole Frame Mount, 106-Degree Opening Angle, Nickel
Duomatic 165 Degree Inset Self Close Rapido Mounting Mod 0 Hinge
165 Degree Full Overlay Screw-On Mod 17 Push Hinge
110 Degree 1/2 Inch Overlay Self Closing Logica Mounting Mod 12 Hinge, Nickel
70 Degree Pie Cut Rapido Mounting Hinge, Nickel
Duomatic 165 Degree Inset Self Close Logica Mounting Mod 0 Hinge
Salice 120-Degree Opening Negative Angle Self-Closing Hinge for -45 to -90-Degree Applications, Tool-less Rapido 3-Hole Mounting, Maximum Overlay Requires 0MM mounting Plate, Sold Separately
105 Degree Half Overlay Self Close Screw-On Mod 8 Hinge, Nickel
Salice 2mm Height Frameless Inline Mounting Plate with Pre-Mounted Euro Screws, Mod 4, Nickel
Salice 6mm Height Frameless Clip Mounting Plate with Pre-Installed 11mm Euro Screws, Mod 8, Nickel Plated
Salice 24mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 120-Degree Opening Negative Angle Self-Closing Hinge for -45 to -90-Degree Applications, Screw-Mounting, Maximum Overlay Requires 0MM mounting Plate, Sold Separately