Salice 120-Degree Opening Negative Angle Self-Closing Hinge for -45 to -90-Degree Applications, Tool-less Rapido 3-Hole Mounting, Maximum Overlay Requires 0MM mounting Plate, Sold Separately
The unique geometry of the Salice SH-C2PBH99 hinge ensures perfect results for negative angle hinges from -45 to -90 Degrees. Due to different cabinet constructions, the 0mm mounting plate sold separately is recommended, but the space between the two closed doors can be lessened by using a different width mounting plate.
Ends Oct 16
Save more! Buy a Pro Pack.
Large Project?
Orders $2500+ Qualify for Special Discounts.
Build your item list and get a Quick Quote
view bid cartAll the product info you could ask for...
-
Size Info
- For door thickness : (5/8 - 1") 16 - 26 mm
- Tab : 3 - 6 mm
- Installation Note : Tool-free install: Requires pre-bored Hinge cup + two 8 mm holes per manufacturer’s specs.
-
Manufacturer Info
- Manufacturer : Salice
- Manufacturer Part # : C27BH99
-
Other Important Info
- Finish : Nickel-plated
- Material : Steel cup, zinc alloy hinge arm
- Mounting : Rapido
- Overlay : Negative
- Opening angle : 120 degree
- Degree of Opening : Non-Standard Negative
- Overlay: : Full
- Product Type : Long Arm Hinge
- Type of closing : Self-close
Manufacturer Resources
If Measured Overlay is 18-19MM (11/16"-3/4") use these Mounting Plates for Frameless Applications
If Measured Overlay is 16-17MM (5/8"-11/16") use these Mounting Plates for Frameless Applications
Specialty Angle Hinge - Optional Plates
Other - Frameless Cabinet Hinges by Salice
Our customers say Salice products...
based on 550 ratings
- 1 of 1 people found the following review helpful
5 of 5 Perfect January 20th, 2025
by David from Saint Petersburg, FLNeeded an exact match for a 120 degree hinge and unable to find elsewhere. Works great
- 4 of 5 Pretty good service February 27th, 2025
by Andy from MISHAWAKA, INVery helpful to prior unusual hinges for a project. They even recommended potentially missing items. I wish they'd allow for order changes longer than 30 minutes.
- 1 of 1 people found the following review helpful
5 of 5 Great find. July 13th, 2026
by Jessica from Lafayette, LAThese were the only hinges we could locate for a less than normal door thickness. The measurements were clearly posted and made it very helpful to order. Installed and worked great!
This review is about similar Salice Hinges. (SH-C1P6A99)
- 1 of 1 people found the following review helpful
5 of 5 Finally found the right hinge June 1st, 2026
by Tara from Vancouver, WANeeded to replace some worn out hinges and struggled to find the right ones. Finally found the right ones, shipping was fast and purchasing was easy. Will be ordering more!
This review is about similar Salice Hinges. (SH-C1P6DD9)
- 1 of 1 people found the following review helpful
5 of 5 works! April 21st, 2026
by Nathan from Santa Barbara, CAmounting plate seems like good quality and worked perfectly.
This review is about similar Salice Hinges. (SH-BAR3R09)
Reviews about us...
- 5 of 5 | October 5th, 2026
Easy find easy install!Great service
- 5 of 5 | October 5th, 2026
Very satisfied with the construction of the unit and how strong the spring is.
- 4 of 5 | October 5th, 2026
Hello,I had thought that I dotted my I's and crossed by T's on getting an accurate cross reference from an old early 90's GRASS hinge that is now obsolete. Your website did show which updated hinges would replace my old ones. The old hinges were a two-pie
- 5 of 5 | October 5th, 2026
I haven't done cabinet work in years. So when I ordered a set of Grass hinges, I didn't know I had to order the clips separately. I called CP and was assisted by Frank, a very knowledgeable fellow. He found the correct clips and I received them later in t
- 5 of 5 | October 5th, 2026
Cabinets where great and arrived as promised. There was one damaged cabinet but cabinets.com were quick and helpful and had me a new one within a couple weeks. Would definitely recommend them.
Salice 0mm Height Frameless Clip Wing Mounting Plate for Screw Mounting, Mod 29
Salice 0mm Frameless Wing Mounting Plate for Screw-On Mounting, Nickel Plated Steel
Salice 2mm Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 0mm Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 2mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 3mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Frameless Clip Mounting Plate with Pre-Installed 11mm Euroscrews 3mm Mod 5, Nickel
Salice 3mm Frameless Wing Mounting Plate for Screw-On Installation, Nickel Plated Steel
Salice 3mm Height Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 0mm Frameless Wing Mounting Plate with Pre-Mounted Anchors and Screws , Nickel Plated Steel
Salice 0mm Clip Frameless Mounting Plate For Woodscrew Mounting, Nickel Plated
Salice 0mm Frameless Concealed Mounting Plate for Screw-On Mounting , Nickel Plated Steel
Cruciform Slide-On Frameless Mounting Plate For Woodscrews 0mm Mod 2, Nickel
Salice Push-To-Open Full Overlay 165 Degree Opening Hinge for Dowel (3-Hole) Mounting, Touch-to-Open (Touch-Latch) Device Additionally Required
94 Degree +45 Degree Corner Self Close Screw-On Hinge, Nickel
Salice 0mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
155 Degree Full Overlay Zero Protrusion/Thick Door Self Close Dowel Hinge
Concertina Bi-Fold Hinge for Cabinet Bi-Fold Sliding Wood Door Systems, Use with Sliding Block
110 Degree Full Overlay Self Close Dowel Mounting Mod 17 Hinge
Silentia+ 105 Degree Inset +/- Switch, Screw-On Hinge, Nickel
Salice Silentia 105 degree Soft-Close 1/2 Inch Overlay Hinge for Dowel Mounting, Adjustable +/- Closing Speed, Nickel Plated
Salice Push-To-Open Full Overlay 110 Degree Opening Hinge for Wood Screw Mounting, Touch-to-Open (Touch-Latch) Device Additionally Required , Nickel
105 Degree Full Overlay Self Close Screw-On Mod 17 Hinge, Nickel
Salice 12mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
165 Degree Hinge 1/2 Inch Overlay Self Close Dowel Mounting Mod 12 Hinge
Salice 6mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
110 Degree Full Overlay Self Closing Logica Mounting Hinge, Nickel
Salice 18mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 6mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice Silentia 105-degree Soft-Close Partial 1/4 to 3/8 Inch Overlay Hinge for Screw-On Mounting, Nickel Plated
Cover Cap Hinge Arm For Duomatic Concealed Hinges Without Logo, Nickel
Single 8mm Replacement Dowel for 3-Hole Hinge Drilling, Plastic
Salice Push-To-Open Full Inset 165 Degree Opening Hinge for Dowel (3-Hole) Mounting, Touch-to-Open (Touch-Latch) Device Additionally Required, Nickel
Flange Cover Cap For Duomatic Concealed Hinges, Nickel Plated
Salice Silentia 1/2" Overlay Soft-Closing Face Frame Hinge for Dowel Mounting, 2-Hole Frame Mount, 106-Degree Opening Angle, Nickel
110 Degree Full Overlay with Rapido Mounting Hinge, Nickel
Salice Mod17 Zero Protrusion Thick Door Full Overlay Self-Close 155 Degree Opening Hinge for Screw Installation, Nickel
3mm Frameless Clip Mounting Plate For Woodscrews Mod 5, Nickel
Salice 9mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 12mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Duomatic 165 Degree Inset Self Close Rapido Mounting Mod 0 Hinge
165 Degree Full Overlay Screw-On Mod 17 Push Hinge
110 Degree 1/2 Inch Overlay Self Closing Logica Mounting Mod 12 Hinge, Nickel
270 Degree Full Overlay Self Close Screw-On Institutional Hinge, Nickel Plated
Duomatic 165 Degree Inset Self Close Logica Mounting Mod 0 Hinge
Salice 120-Degree Opening Negative Angle Self-Closing Hinge for -45 to -90-Degree Applications, Tool-less Rapido 3-Hole Mounting, Maximum Overlay Requires 0MM mounting Plate, Sold Separately
70 Degree Pie Cut Rapido Mounting Hinge, Nickel
105 Degree Half Overlay Self Close Screw-On Mod 8 Hinge, Nickel
Salice 2mm Height Frameless Inline Mounting Plate with Pre-Mounted Euro Screws, Mod 4, Nickel
Salice 6mm Height Frameless Clip Mounting Plate with Pre-Installed 11mm Euro Screws, Mod 8, Nickel Plated
Salice 24mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Silentia 106 Degree 1-1/4 Inch Overlay Screw-On Hinge, Titanium