I was very impressed with Cabinet Parts for the rapid response in getting me the parts I needed! I got an exact match to the parts I was replacing..almost. This is more an FYI for the end user of any parts like this. The parts I received had the exact same model numbers as my old part, but over the years the manufacturer of the parts made a slight modification in the size of the part which affected the normal operation of the drawer glide. Length and height were the same but the new ones were a full 1/4" wider which changes the front mounting of the glide receiver. It took a minute to find the issue but once discovered was an easy fix. Cabinet Parts was not responsible for this issue! they sent me what I ordered in a very timely fashion and for a great price! Their customer service was also spot on! Thank you Cabinet Parts for a job well done!

This review is about a different size/color of this item. (SH-433.17.746)

Was this review helpful? yes no

I purchased 6 pairs of 15" Progressa+ drawer slides for a walnut dresser. Of the 12 slides, 5 were assembled incorrectly at the factory. This review page does not support attaching pictures, but basically the geared mechanism was assembled incorectly. On the 5 bad slides, the gears were off from 1/4" to over 1/2". The intended use was for inset drawers, and it's not feasable to have one side of the drawer to be 1/4" to 1/2" shorter than the other. I was able to disassemble the slide, re-align the internals and re-attach the geared slider to bring the slides into correct position using a 'good' slide as a reference. The quality of the slides is actually very good, just the assembly in the factory was bad. More troubling is that I've reported this on the Salice customer feedback site over a week ago, and have not had any response at all.

This review is about similar Salice Drawer Slides. (SH-G5U6S381XXF6)

Was this review helpful? yes no

It would have been nice to get the technical data in paper form.

This review is about similar Salice Drawer Slides. (SH-G7U9S686CXF2)

Was this review helpful? yes no

Was there installation instructions? no Was there information on how to get help? no I installed the push to open undermount slide just fine - and it is great on push to open - maybe I needed to mention that I wanted it to close and stay closed after I pushed to open. There is something on the website to contact the manufacturer if you needed help - did they provide a website for support or a phone number - no And the plastic push to open device I could not find on the other companies website. I am stymied right now - disappointed with CabinentParts.com and have two drawers stuck open

This review is about similar Salice Drawer Slides. (SH-433.17.853)

Was this review helpful? yes no

I ordered some of these, just in case, but did not need them for my project. They apparently provide a hole for the rear hook on a shelf that is too thin to drill the hole in the shelf. These come singly, so if you need them, order two for each pair of drawer slides.

This review is about similar Salice Drawer Slides. (SH-A8825650000)

Was this review helpful? yes no