Silentia+ 105 Degree Inset +/- Switch Logica Mounting Hinge, Nickel
Ends Oct 07
Save more! Buy a Pro Pack.
Large Project?
Orders $2500+ Qualify for Special Discounts.
Build your item list and get a Quick Quote
view bid cartAll the product info you could ask for...
-
Size Info
- Hinge Screw Spacing : 45/9.5 mm
- For door thickness : (9/16 - 13/16") 15 - 20 mm
- Tab : 3 - 6 mm
- Installation Note : Tool-free install: Requires pre-bored Hinge cup + two 8 mm holes per manufacturer’s specs.
- Installation Note : Set back mounting plate screw-on position by door thickness +1.5 mm.
-
Manufacturer Info
- Manufacturer : Salice
- Manufacturer Part # : C1J6PE9
-
Other Important Info
- Finish : Nickel-plated
- Material : Steel
- Opening angle : 105 degree
- Type of closing : New soft close adjustment switch
- Overlay : None (Inset Hinge)
- Product Type : Long Arm Hinge
Manufacturer Resources
If door is flush with Cabinet Box or Frame use these Mounting Plates for Frameless Inset Applications
Other - Frameless Cabinet Hinges by Salice
Our customers say Salice products...
based on 550 ratings
- 1 of 1 people found the following review helpful
5 of 5 Great find. July 13th, 2026
by Jessica from Lafayette, LAThese were the only hinges we could locate for a less than normal door thickness. The measurements were clearly posted and made it very helpful to order. Installed and worked great!
This review is about similar Salice Hinges. (SH-C1P6A99)
- 1 of 1 people found the following review helpful
5 of 5 Finally found the right hinge June 1st, 2026
by Tara from Vancouver, WANeeded to replace some worn out hinges and struggled to find the right ones. Finally found the right ones, shipping was fast and purchasing was easy. Will be ordering more!
This review is about similar Salice Hinges. (SH-C1P6DD9)
- 1 of 1 people found the following review helpful
5 of 5 works! April 21st, 2026
by Nathan from Santa Barbara, CAmounting plate seems like good quality and worked perfectly.
This review is about similar Salice Hinges. (SH-BAR3R09)
- 1 of 1 people found the following review helpful
5 of 5 Hinge Replcement April 6th, 2026
by Warren from Silver Spring, MDThese hinges worked perfectly. I replaced a single broken hinge, as well as the other 3 hinges, on 2 cabinet doors with these soft close hinges. No more slamming of cabinet doors!!! My ears and nerves are happier!!!
This review is about similar Salice Hinges. (SH-C1P6DD9)
- 1 of 5 Wrong finish July 21st, 2026
by Jeffery from Lodi, CAI ordered hinges with the same finish as the one pictured on this page, the finish on the hinges that were sent was dark.
This review is about similar Salice Hinges. (SH-CUR37D6R)
Reviews about us...
- 5 of 5 | September 22nd, 2026
Fast order processing and delivered quickly. Parts were correct.
- 4 of 5 | September 22nd, 2026
I went online to purchase some hinges that were made years ago & from Germany. So I found a hinge that might work & ordered it on line , but to my dismay, the company was having trouble with their computer & I had to call by phone & order my parts. The pe
- 5 of 5 | September 22nd, 2026
one shelf in my.corner “lazy Susan” cupboard was broken. Cabinent Parts had a large selection of replacement shelves. Finding the carrect size and color was simple. Shipping was fast and the repair only took a few minutes after the shelf was delivered.
- 5 of 5 | September 22nd, 2026
Delivered on time . And the parts fit perfectly, very happy. Thank you
- 5 of 5 | September 21st, 2026
Great customer service! It was a very old hinge and took substantial research. The replacement worked perfectly.
Salice 0mm Height Frameless Clip Wing Mounting Plate for Screw Mounting, Mod 29
Salice 0mm Frameless Wing Mounting Plate for Screw-On Mounting, Nickel Plated Steel
Salice 2mm Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 0mm Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 0mm Frameless Wing Mounting Plate with Pre-Mounted Anchors and Screws , Nickel Plated Steel
Salice 0mm Clip Frameless Mounting Plate For Woodscrew Mounting, Nickel Plated
Salice 0mm Frameless Concealed Mounting Plate for Screw-On Mounting , Nickel Plated Steel
Cruciform Slide-On Frameless Mounting Plate For Woodscrews 0mm Mod 2, Nickel
Salice 2mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 3mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
94 Degree +45 Degree Corner Self Close Screw-On Hinge, Nickel
Salice Push-To-Open Full Overlay 165 Degree Opening Hinge for Dowel (3-Hole) Mounting, Touch-to-Open (Touch-Latch) Device Additionally Required
Salice 0mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
155 Degree Full Overlay Zero Protrusion/Thick Door Self Close Dowel Hinge
Concertina Bi-Fold Hinge for Cabinet Bi-Fold Sliding Wood Door Systems, Use with Sliding Block
110 Degree Full Overlay Self Close Dowel Mounting Mod 17 Hinge
Silentia+ 105 Degree Inset +/- Switch, Screw-On Hinge, Nickel
Salice 3mm Height Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice Silentia 105 degree Soft-Close 1/2 Inch Overlay Hinge for Dowel Mounting, Adjustable +/- Closing Speed, Nickel Plated
105 Degree Full Overlay Self Close Screw-On Mod 17 Hinge, Nickel
Salice 6mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 12mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice Push-To-Open Full Overlay 110 Degree Opening Hinge for Wood Screw Mounting, Touch-to-Open (Touch-Latch) Device Additionally Required , Nickel
165 Degree Hinge 1/2 Inch Overlay Self Close Dowel Mounting Mod 12 Hinge
110 Degree Full Overlay Self Closing Logica Mounting Hinge, Nickel
Salice 18mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Single 8mm Replacement Dowel for 3-Hole Hinge Drilling, Plastic
Cover Cap Hinge Arm For Duomatic Concealed Hinges Without Logo, Nickel
3mm Frameless Clip Mounting Plate For Woodscrews Mod 5, Nickel
Salice 9mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice Push-To-Open Full Inset 165 Degree Opening Hinge for Dowel (3-Hole) Mounting, Touch-to-Open (Touch-Latch) Device Additionally Required, Nickel
Flange Cover Cap For Duomatic Concealed Hinges, Nickel Plated
Salice Mod17 Zero Protrusion Thick Door Full Overlay Self-Close 155 Degree Opening Hinge for Screw Installation, Nickel
Salice Zero Protrusion Partial Overlay Thick Door Hinge, 155 Degree Opening, Self Close, Screw-On Mounting
Salice 6mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice Silentia 1/2" Overlay Soft-Closing Face Frame Hinge for Dowel Mounting, 2-Hole Frame Mount, 106-Degree Opening Angle, Nickel
Duomatic 165 Degree Inset Self Close Rapido Mounting Mod 0 Hinge
110 Degree Full Overlay with Rapido Mounting Hinge, Nickel
Salice Silentia 105-degree Soft-Close Partial 1/4 to 3/8 Inch Overlay Hinge for Screw-On Mounting, Nickel Plated
Salice 12mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Duomatic 165 Degree Inset Self Close Logica Mounting Mod 0 Hinge
165 Degree Full Overlay Screw-On Mod 17 Push Hinge
70 Degree Pie Cut Rapido Mounting Hinge, Nickel
270 Degree Full Overlay Self Close Screw-On Institutional Hinge, Nickel Plated
110 Degree 1/2 Inch Overlay Self Closing Logica Mounting Mod 12 Hinge, Nickel
105 Degree Half Overlay Self Close Screw-On Mod 8 Hinge, Nickel
Salice 6mm Height Frameless Clip Mounting Plate with Pre-Installed 11mm Euro Screws, Mod 8, Nickel Plated
Silentia 106 Degree 1/2 Inch Overlay Self Close Screw-On Hinge, Titanium
Silentia 106 Degree 1-1/4 Inch Overlay Screw-On Hinge, Titanium
Salice 120-Degree Opening Negative Angle Self-Closing Hinge for -45 to -90-Degree Applications, Screw-Mounting, Maximum Overlay Requires 0MM mounting Plate, Sold Separately