Duomatic 94 Degree Full Overlay Self Close Logica Thick Door Mod 17 Hinge
Ends Jun 21
Save more! Buy a Pro Pack.
Large Project?
Orders $2500+ Qualify for Special Discounts.
Build your item list and get a Quick Quote
view bid cartAll the product info you could ask for...
-
Size Info
- For door thickness : (5/8" - 1 3/8") 16 - 35 mm
- Installation Note : Tool-free install: Requires pre-bored Hinge cup + two 8 mm holes per manufacturer’s specs.
-
Manufacturer Info
- Manufacturer : Salice
- Manufacturer Part # : C2JBA99
-
Other Important Info
- Overlay : Full Overlay
- Product Type : Long Arm Hinge
- Finish : Nickel plated
- Material : Steel
- Opening angle : 94 degree
- Overlay: : Full
Manufacturer Resources
If Measured Overlay is 18-19MM (11/16"-3/4") use these Mounting Plates for Frameless Applications
If Measured Overlay is 16-17MM (5/8"-11/16") use these Mounting Plates for Frameless Applications
If Measured Overlay is 16MM (5/8") use these Mounting Plates for Face Frame Applications
If Measured Overlay is 13MM (1/2") use these Mounting Plates for Face Frame Applications
Other - Frameless Cabinet Hinges by Salice
Our customers say Salice products...
based on 556 ratings
- 1 of 1 people found the following review helpful
2 of 5 Have hinges, didn’t come with clips April 23rd, 2020
by Sarah from Albany, CAI waited for a week to get the hinges to finish my project and they didn’t come with the clips. So I’m back at square one. I’ve emailed the contact that was on my invoice and have had no response. If the parts are sold separately (which still doesn’t make sense to me), there should be huge warnings during checkout and options to pair the clips with the hinges you’re buying. Because of shelter in place orders due to covid19, I have few options to get the right parts. Meanwhile my project stays unfinished.
- 5 of 5 Finally found the right hinge June 1st, 2026
by Tara from Vancouver, WANeeded to replace some worn out hinges and struggled to find the right ones. Finally found the right ones, shipping was fast and purchasing was easy. Will be ordering more!
This review is about similar Salice Hinges. (SH-C1P6DD9)
- 1 of 5 Did not fit cabinet May 21st, 2026
by Vikram from Newark, CAI asked if this is going to fit my cabinet and was told it will be a perfect match - alas when it came it did not fit
This review is about similar Salice Hinges. (SH-C2R6A99)
- 5 of 5 Perfect April 21st, 2026
by Nathan from Santa Barbara, CAGreat hinge.
This review is about similar Salice Hinges. (SH-CFA7P)
- 5 of 5 works! April 21st, 2026
by Nathan from Santa Barbara, CAmounting plate seems like good quality and worked perfectly.
This review is about similar Salice Hinges. (SH-BAR3R09)
Reviews about us...
- 5 of 5 | June 15th, 2026
I had to reorder hinges (I wasn’t happy about that), however once I figured out the solution (luckily everything was in stock), the team went above and beyond to get my shipment out SAME DAY and overnight the needed parts to my job-site. Everything arrive
- 5 of 5 | June 15th, 2026
Exactly what I needed and super quick. Very happy
- 5 of 5 | June 14th, 2026
It works great, insrtuctions perfect, well made
- 5 of 5 | June 14th, 2026
easy to ordergood pricingfast deliverygood overall customer servicethanks for doing a good job
- 5 of 5 | June 14th, 2026
I attempted to reach the Haas cabinet company, as I have done in the past, from drawer replacement parts. I could not reach them. I found this company on line and appreciated the personalized help from them. She walked thru the entire measurement process
Salice 0mm Height Frameless Clip Wing Mounting Plate for Screw Mounting, Mod 29
Salice 0mm Frameless Wing Mounting Plate for Screw-On Mounting, Nickel Plated Steel
Salice 2mm Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 0mm Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 0mm Frameless Wing Mounting Plate with Pre-Mounted Anchors and Screws , Nickel Plated Steel
Salice 0mm Clip Frameless Mounting Plate For Woodscrew Mounting, Nickel Plated
Salice 0mm Frameless Concealed Mounting Plate for Screw-On Mounting , Nickel Plated Steel
Cruciform Slide-On Frameless Mounting Plate For Woodscrews 0mm Mod 2, Nickel
Salice 2mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 3mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Frameless Clip Mounting Plate with Pre-Installed 11mm Euroscrews 3mm Mod 5, Nickel
Salice 3mm Frameless Wing Mounting Plate for Screw-On Installation, Nickel Plated Steel
Salice 3mm Height Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 1mm Height Face Frame Clip Mounting Plate for Screw-On Mounting, Zinc/Nickel Plated
Salice 0mm Face Frame Mounting Plate for Wood Screw Mounting, 3/4-Inch Overlay with Full Overlay Hinge, Nickel Plated Steel
3/4 Inch Overlay Clip Face Frame Plate for Woodscrews 1mm Mod 3, Nickel
Salice 1mm Thickness Face Frame Mounting Plate for Screw Installation, Mod 3, Titanium
1/2 Inch Overlay Clip Face Frame Plate for Woodscrews 4mm Mod 6, Nickel
Salice 4mm Face Frame Mounting Plate for Wood Screw Mounting, 1/2" Overlay with Full Overlay Hinge, Nickel Plated Steel
Salice Face Frame Mounting Plate for Wood Screws, 4mm, 1/2" Overlay with Full Overlay Hinge, Mod 6, Titanium
94 Degree +45 Degree Corner Self Close Screw-On Hinge, Nickel
Salice Full Overlay 165 Degree Opening Push-To-Open Hinge for Dowel (3-Hole) Mounting
155 Degree Full Overlay Zero Protrusion/Thick Door Self Close Dowel Hinge
Salice 0mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Concertina Bi-Fold Hinge for Cabinet Bi-Fold Sliding Wood Door Systems, Use with Sliding Block
Salice 6mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
110 Degree Full Overlay Self Close Dowel Mounting Mod 17 Hinge
Salice 12mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 18mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Silentia 106 Degree 1/2 Inch Overlay Self Close Screw-On Hinge, Titanium
110 Degree Full Overlay Self Closing Logica Mounting Hinge, Nickel
Salice Silentia 105-degree Soft-Close Partial 1/4 to 3/8 Inch Overlay Hinge for Screw-On Mounting, Nickel Plated
Silentia+ 105 Degree Inset +/- Switch, Screw-On Hinge, Nickel
Salice Zero Protrusion Partial Overlay Thick Door Hinge, 155 Degree Opening, Self Close, Screw-On Mounting
165 Degree Hinge 1/2 Inch Overlay Self Close Dowel Mounting Mod 12 Hinge
Salice Silentia 105 degree Soft-Close 1/2 Inch Overlay Hinge for Dowel Mounting, Adjustable +/- Closing Speed, Nickel Plated
Salice 9mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice Full Inset 165 Degree Opening Push-To-Open Hinge for Dowel (3-Hole) Mounting
Silentia+ 105 Degree Full Overlay +/- Switch Dowel Mounting Hinge, Nickel
Cover Cap Hinge Arm For Duomatic Concealed Hinges Without Logo, Nickel
Salice Silentia 110 Degree Opening Partial Overlay Soft Close Screw-On Hinge
Salice Full Overlay 110 Degree Opening Push-To-Open Hinge for Wood Screw Mounting, Nickel
3mm Frameless Clip Mounting Plate For Woodscrews Mod 5, Nickel
Salice 6mm Height Frameless Clip Mounting Plate with Pre-Installed 11mm Euro Screws, Mod 8, Nickel Plated
Single 8mm Replacement Dowel for 3-Hole Hinge Drilling, Plastic
Duomatic 165 Degree Inset Self Close Rapido Mounting Mod 0 Hinge
165 Degree Full Overlay Screw-On Mod 17 Push Hinge
110 Degree 1/2 Inch Overlay Self Closing Logica Mounting Mod 12 Hinge, Nickel
105 Degree Full Overlay Self Close Screw-On Mod 17 Hinge, Nickel
270 Degree Full Overlay Self Close Screw-On Institutional Hinge, Nickel Plated
Salice 6mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Duomatic 165 Degree Inset Self Close Logica Mounting Mod 0 Hinge
Salice 120-Degree Opening Negative Angle Self-Closing Hinge for -45 to -90-Degree Applications, Tool-less Rapido 3-Hole Mounting, Maximum Overlay Requires 0MM mounting Plate, Sold Separately
70 Degree Pie Cut Rapido Mounting Hinge, Nickel
Salice Mod17 Zero Protrusion Thick Door Full Overlay Self-Close 155 Degree Opening Hinge for Screw Installation, Nickel
Silentia 1.8mm (3/32") Height Spacer for Concealed Hinge Cup, Clear Plastic
110 Degree Inset Self Close Rapido Mounting Mod 0 Hinge, Nickel
Silentia+ 105 Degree Full Overlay +/- Switch Rapido Hinge, Nickel
105 Degree Half Overlay Self Close Screw-On Mod 8 Hinge, Nickel
Salice 24mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29