Salice 94 degree Degree Inset Free Swing Hinge
Product Discontinuation AlertThis item has left our catalog. It's either upgraded to a newer model, didn't meet our high customer satisfaction standards, or the manufacturer said goodbye. But don't worry, CabinetParts is always here with top-notch alternatives.See Newer Models
All the product info you could ask for...
-
Size Info
- Cup Depth : 11MM
- Bore Diameter : 35MM
-
Manufacturer Info
- Manufacturer Part # : C2P5P99
- Manufacturer : Salice
-
Other Important Info
- Cabinet Application : Frameless
- Includes : (1) Hinge
- Product Finish : Nickel Plated
- Mounting Type : Screw On
- Material : Steel
- Overlay : Inset
- Degree of Opening : 94
- Product Type : Long Arm Hinge
- Closing Type : Free Swinging
Manufacturer Resources
-
Helpful Videos
-
How to Measure Your Cabinet Door Overlay -
How to adjust your frame-less cabinet hinge -
How to update your Frame-less Cabinet Hinge -
How to Install Salice 200 & F Series Hinges
If door is flush with Cabinet Box or Frame use these Mounting Plates for Frameless Inset Applications
Installation Hardware
If Measured Overlay is 16MM (5/8") use these Mounting Plates for Face Frame Applications
If Measured Overlay is 11.5MM (7/16") use these Mounting Plates for Face Frame Applications
Other - 94 Degree European Cabinet Hinges
Our customers say Salice products...
based on 562 ratings
- 5 of 5 Finally found the right hinge June 1st, 2026
by Tara from Vancouver, WANeeded to replace some worn out hinges and struggled to find the right ones. Finally found the right ones, shipping was fast and purchasing was easy. Will be ordering more!
This review is about similar Salice Hinges. (SH-C1P6DD9)
- 1 of 5 Did not fit cabinet May 21st, 2026
by Vikram from Newark, CAI asked if this is going to fit my cabinet and was told it will be a perfect match - alas when it came it did not fit
This review is about similar Salice Hinges. (SH-C2R6A99)
- 5 of 5 Perfect April 21st, 2026
by Nathan from Santa Barbara, CAGreat hinge.
This review is about similar Salice Hinges. (SH-CFA7P)
- 5 of 5 works! April 21st, 2026
by Nathan from Santa Barbara, CAmounting plate seems like good quality and worked perfectly.
This review is about similar Salice Hinges. (SH-BAR3R09)
- 5 of 5 Hinge Replcement April 6th, 2026
by Warren from Silver Spring, MDThese hinges worked perfectly. I replaced a single broken hinge, as well as the other 3 hinges, on 2 cabinet doors with these soft close hinges. No more slamming of cabinet doors!!! My ears and nerves are happier!!!
This review is about similar Salice Hinges. (SH-C1P6DD9)
Reviews about us...
- 5 of 5 | June 19th, 2026
Ordered the wrong parts and they were great fixing my issue. Will be my go to from now till on
- 5 of 5 | June 19th, 2026
Good service. Had parts i needed in couple of days.
- 5 of 5 | June 19th, 2026
Tried finding the hinges elsewhere. Found them right away. Perfect match.
- 4 of 5 | June 18th, 2026
I was able to find the exact hinge needed to replace broken hidden Soss hinges in a Martha Washington cabinet. The price was reasonable. It did take a while to ship out (ordered May 15, shipping notice June 2) but then arrived quickly once shipped.
- 5 of 5 | June 18th, 2026
I have looked and looked for replacement parts for my cabinets and was about to give up hope, but thankfully they had the exact parts I needed. They arrived quickly, reasonably priced and I am thrilled.
Salice 0mm Frameless Wing Mounting Plate for Screw-On Mounting, Nickel Plated Steel
Salice 0mm Height Frameless Clip Wing Mounting Plate for Screw Mounting, Mod 29
Salice 0mm Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 2mm Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
#6 x 5/8 inch Flat Head Hinge Screws (25 Pack)
Professional Self-Centering Vix Bit, Essential Drill Bit for Hinge Installation
#10 x 5/8 inch Pan Head Screws (25 Pack)
35MM Boring Bit Right Hand
Blum #2 Pozi Screwdriver for Hinge Adjustment and Installation Screws
Cruciform Slide-On Mounting Plate Face Frame for Woodscrews 1mm Mod 3, Nickel
Salice Series F, Thick Door Hinge, Full Inset, Self Closing, 40mm Bore, Doors up to 1-9/16” Thick
Salice Series F, Thick Door Hinge, Full Overlay, Self Closing, 40mm Bore, Doors up to 1-9/16” Thick
Salice Silentia+ Full-Overlay Soft Close Hinge for Thick Doors up to 1-9/16" Thickness, Screw-On, 40mm Drilling Required
Salice Silentia+ Full Inset Soft Close Hinge for Thick Doors up to 1-9/16" Thickness, Screw-On Mounting, 40mm Drilling Required
Cliptop 94 Degree Mini Hinge Overlay / Self-Closing
Cliptop 94 Degree Mini Hinge Inset / Self-Closing
Cliptop 94 Degree Mini Hinge Partial Overlay / Self-Closing
Salice 94 Degree Opening Inset Hinge, Soft-Close for Screw-On Mounting, Zinc Plated
Salice 94 Degree Full Overlay Self Closing Hinge
Salice 94-Degree Opening Inset Hinge, Self-Closing for Screw-On Mounting, Nickel Plated
Salice 94 Degree Full Overlay Self Closing Glass Door Hinge
Salice Silentia+ Partial-Overlay Soft Close Hinge for Thick Doors up to 1-9/16" Thickness, Screw-On, 40mm Drilling Required
Salice 94 Degree Opening Full Overlay Hinge, Soft-Close for Screw-On Mounting, Zinc Plated
Salice 94 Degree Opening Half Overlay Hinge, Soft-Close for Screw-On Mounting, Zinc Plated
Salice Inset Self Closing Blind-Corner Hinge, 110 Degree Opening Angle for Screw Mounting, Nickel
Salice 94 Degree Inset Self Closing Glass Door Hinge
Salice 94 Degree Inset Self Closing Hinge with Dowel
Salice 94 Degree Half Overlay Self Closing Glass Door Hinge
Salice 94 degree Degree Inset Free Swing Hinge
Salice 90 Degree Blind Corner Hinge with Dowel
Salice +45 Degree Corner Hinge
Salice +45 Degree Corner Hinge with Dowel
Salice Series F, Thick Door Hinge, Partial Overlay, Self Closing, 40mm Bore, Doors up to 1-9/16” Thick
Salice Series F, Thick Door Hinge, Full Overlay, Free-Swinging, 40mm Bore, Doors up to 1-9/16” Thick
Salice Series F, Thick Door Hinge, Partial Overlay, Free-Swinging, 40mm Bore, Doors up to 1-9/16” Thick
Salice Series F, Thick Door Hinge, Full Inset, Free-Swinging, 40mm Bore, Doors up to 1-9/16” Thick
Nexis Screw On 90 degree Blind Corner Inset Hinge, Self Closing