Sliding Door Hardware Pocket Door Hardware 1500 Pocket Door Frames & Hardware by Johnson Hardware
Loading from Primary Photo

JH1562 Wall Bypass Pocket Door Frame Set for 2 x 6 Inch Framed Opening, Door Size 24 Inch Width x 84 Inch Height x 1-3/8 Required Inch Door Thickness, 200 Lbs Load Bearing

  Rating 4.8 | 227 Reviews in the past 24 months | Our Item Number JH-15622070

The 1562 Series Bypass Pocket Door Frame is designed to carry two 1-3/8" heavy solid core bypassing doors in a standard 2 x 6 timber or 6" steel framed stud walls when using the 1576PLBG 6" Steel Stud Adapter Kit. The 1562 allows architects and designers to specify large room dividing openings with minimum wall obstruction for "clean and open" living spaces. The 1562 Frame Kit is factory configured to accept most standard door sizes and packaged for easy transport and fast installation in either bypass pocket door or converging bypass pocket door applications.

$
330.54 Each
$472.21
SAVE 30%
Ends Jun 21

Maximum Door Size:

Closing Type:

Product Info Door Thickness: 1-3/8 Inch, Stud Wall Size: 2" x 6", Wheel Diameter: 1 Inch, Max Door Height: 7 Ft, Max Door Width: 2 Ft, See more product details
Qty:       Each
 

Large Project?

Orders $2500+ Qualify for Special Discounts.

Build your item list and get a Quick Quote

view bid cart
Compare this item

All the product info you could ask for...

  • Size Info

  • Door Thickness : 1-3/8 Inch
  • Includes : (1) Header (Factory Assembled) (4) Steel Split Studs (4) 1125 Ball Bearing Wheel Door Hangers (2) 511595 Split Stud Floor Brackets (1) 1155 Track Stop (2) 1513 Door Bumper (1) 1712 Adjustment Wrench (1) 2032 1-3/8 InchSide Mount Door Guide (3) 2040 Door Guide Cover Plate (1) 2054 Multi-Door Catch Set (1) 2083 Finished Floor Door Guide (1) 2084 Sub Floor Door Guide
  • Maximum Door Size : 24" x 84"
  • Stud Wall Size : 2" x 6"
  • Key Features : Shallow Pocket Wide Openings: Ideal for applications where wall structure or obstacles do not allow a deep pocket
    Time Saver: The factory measured and fabricated 1562 installs quickly into standard 2 Inch x 6 Inch stud walls
    Standard Door Sizes: The 1562 accepts standard 1-3/8 Inch (35mm) door sizes
    Sequential Door Opening: Pull 1st door and the 2nd door follows
    Self Adjusting Floor Brackets: Compensate for settling floors and walls
  • Wheel Diameter : 1 Inch

  • Other Important Info

  • Product Type : Pocket Door Frame
  • Max Door Height : 7 Ft
  • Max Door Width : 2 Ft
  • Mount Type : Top-Mount
  • Track Finish : Aluminum
  • Closing Type : Standard Close
  • Track Series : 100
  • Collection : 1562
  • Load Rating/Weight Capacity : 200 Lbs
  • Wheel Type : Nylon Encapsulated Sealed Ball Bearing
  • Steel Component Finish : 12-14 Guage
  • Split Stud Construction : 18 Gauge Cold Rolled Galvanized Steel
  • Country of Origin : USA

  • Manufacturer Resources

Back to Top
back to top

Our customers say Johnson Hardware products...

  4.8 out of 5
based on 227 ratings

"These reviews are from our customers who have purchased Johnson Hardware products."
  • 3 of 5 Pocket door rollers June 10th, 2026
    by Joe from Franklin, IN

    Seemed like it took a while to get here. Other kits I seen for sale on the web had a small bent wrench included to adjust them. Yours did not have it. I had to remove all door trim to adjust and level the door and now fill nail holes, caulk the cracks and repaint the trim.

    This review is about similar Johnson Hardware Sliding Door Hardware. (JH-1020)

    Was this review helpful? yes no

  • 5 of 5 Replacement November 20th, 2025
    by Nicole from Washington, IL

    Replaced rollers after 15yrs an was a direct replacement very impressed fit perfect

    This review is about similar Johnson Hardware Sliding Door Hardware. (JH-1500PPK3)

    Was this review helpful? yes no

  • 5 of 5 Great _ Just what I needed November 18th, 2025
    by James from GONZALES, LA

    I had a track that was too short so the guide kept falling off and door would stick. Ordered this to extend the track and it worked perfectly. Cut very easy with my metal saw, drilled a couple of holes and screwed right up to the existing track.

    This review is about similar Johnson Hardware Sliding Door Hardware. (JH-100-48)

    Was this review helpful? yes no

  • 5 of 5 Door slider hinges November 3rd, 2025
    by Douglas from Morehead, KY

    Better than factory I replaced slider rollers in my camper replacement hinges were metal not plastic much higher grade

    This review is about similar Johnson Hardware Sliding Door Hardware. (JH-1020)

    Was this review helpful? yes no

  • 1 of 1 people found the following review helpful
    5 of 5 Great for RVs!!! November 28th, 2024
    by Brandan from Cleveland, OH

    I had the very cheap rails on my sliding doors in my RV and they kept falling off and started just destroying the doors and walls. I looked a lot of places and didn’t find much as a replacement but stumbled on this it was by far the best pricing and everything is super solid and feels very good quality. They were a huge improvement over what I had previously! I would definitely recommend these they are smooth and everything went up super easy. The order showed up fast! I will definitely be using cabinetparts.com in the future!

    This review is about similar Johnson Hardware Sliding Door Hardware. (JH-100-60)

    Was this review helpful? yes no

See More Reviews

Reviews about us...

  • 5 of 5 | June 15th, 2026

    I had to reorder hinges (I wasn’t happy about that), however once I figured out the solution (luckily everything was in stock), the team went above and beyond to get my shipment out SAME DAY and overnight the needed parts to my job-site. Everything arrive

  • 5 of 5 | June 15th, 2026

    Exactly what I needed and super quick. Very happy

  • 5 of 5 | June 14th, 2026

    It works great, insrtuctions perfect, well made

  • 5 of 5 | June 14th, 2026

    easy to ordergood pricingfast deliverygood overall customer servicethanks for doing a good job

  • 5 of 5 | June 14th, 2026

    I attempted to reach the Haas cabinet company, as I have done in the past, from drawer replacement parts. I could not reach them. I found this company on line and appreciated the personalized help from them. She walked thru the entire measurement process

See More Reviews
Back to Top
back to top
×