CLIP Top 95 Degree Opening Self Closing Inserta Overlay +30 Degree Angle Hinge
CLIP top hinges are concealed hinges for cabinet doors and guarantee trustworthy function and attractive design. Doors can be attached and removed quickly without tools - they snap on and off. They work in almost any hinge application because of the wide variety of mounting plates available, meaning these hinges can be used in frameless and face frame cabinets.
Ends Nov 21
Large Project?
Orders $2500+ Qualify for Special Discounts.
Build your item list and get a Quick Quote
view bid cartAll the product info you could ask for...
-
Size Info
- Key Features : + 30 Degree Positive Angled Hinge
Specifically designed for panel constructed (frameless) cabinets
Accommodates cabinet front angles from -45 Degrees to +45 Degrees, in 5 Degrees increments - Installation Note : Tool-free install: Requires pre-bored Hinge cup + two 8 mm holes per manufacturer’s specs.
-
Manufacturer Info
- Manufacturer : Blum
- Manufacturer Part # : 79A9596BT
-
Other Important Info
- Product Type : Hinge
- Blum ID Number : 07369033
- Series : CLIP Top
- Overlay : Full Overlay
- Mounting Type : INSERTA
- Degree of Opening : 95 Degrees
- Close Type : Self-close
Manufacturer Resources
-
Helpful Videos
-
CLIP Top Demo -
CLIP top BLUMOTION Overview
Other - Clip Top European Hinges by Blum
Our customers say Blum products...
based on 2718 ratings
- 5 of 5 Perfect replacement hinge November 9th, 2026
by David from READING, PAThe hinges were exact replacement item. 2 minute repair. Easy transaction- highly recommend!
This review is about similar Blum Hinges. (BH79T8500)
- 4 of 5 For kitchen cabinets November 6th, 2026
by Dalit from Los Altos, CAThese hinges work great but look very bulky. I used them in my cabinetry kitchen and wish there would be a more aesthetic option.
This review is about similar Blum Hinges. (BH71B7550)
- 2 of 5 Disappointed with these hinges November 4th, 2026
by Mark from Land O Lakes, FLThe hinges were listed as " full overlay", however when I tried to adjust them more than 5/8" the mechanism hits the side of the cabinet frame. If you adjust it any further the mechanism binds and the door will not close. I had to cut a small notch 1/8" deep behind each hinge in order to be able to adjust them to the full 3/4"
This review is about similar Blum Hinges. (BH70M2550)
- 5 of 5 Great for Inset Doors November 4th, 2026
by Bill from Birmingham, ALI have used this hinge with the recommended clip many times for installing inset hinges. It is a perfect fit for that application. I keep a box of them in my shop all the time.
This review is about similar Blum Hinges. (BH71B3750)
- 5 of 5 perfect match October 23rd, 2026
by Dave from Fairfax Station, VAcabinetparts found the prefect replacement for a 25 year old hinge that took only minutes to replace!
This review is about similar Blum Hinges. (BH79T8500)
Reviews about us...
- 5 of 5 | November 9th, 2026
Great price, fast shipping perfect fit for our lazy Susan corner cabinet
- 5 of 5 | November 9th, 2026
I had a hinge for a cabinet in the corner of my kitchen break. A local store didn’t have it, and referred me to cabinetparts.com. Although the hinge is apparently obscure, they had it. Delivery timing was as expected, and the hinge fit perfectly. Project
- 5 of 5 | November 9th, 2026
The product was received as stated and was in excellent shape. Installation was easy, and we are all pleased with the operation of the slide out garbage can holder.
- 5 of 5 | November 8th, 2026
The soft close Cabinet hinges were perfect.
- 5 of 5 | November 7th, 2026
Glides are great and the purchase experience was straight forward!
Clip-Top BLUMOTION Full Overlay Soft-Close 110 Degree Opening Hinge for Screw Installation, Nickel
Clip-Top BLUMOTION Full Inset Soft-Close 110 Degree Opening Hinge for Screw Installation, Nickel
Clip-Top BLUMOTION Plus Full Overlay Soft-Close 110+ Degree Opening Hinge for Larger Overlays, Screw Installation, Nickel
Clip-Top BLUMOTION Partial Overlay Soft-Close 110 Degree Opening Hinge for Screw Installation, Nickel
Clip-top 170 Degree Hinge Overlay / Self-Closing (Replacement for 70.550, 70.610, 70.655, 84.655, 90.610, 90.655)
Blum ClipTop Self-Closing Bi-Fold Door Hinge (Replacement for 79.815, 79.850), 60 Degree Opening Angle, Use with 0mm Mounting Plate
Cliptop 110 Degree Hinge Overlay/Self-Closing (Replacement for 70.355, 84.355, 90.355)
Cliptop Inserta 110 Degree Opening Soft-Close Blumotion Hinge, Full Overlay using 0mm Mounting Plate, Tool-Free, 3-Hole Hinge Boring Required
Clip-Top BLUMOTION Zero Protrusion Full Overlay Soft-Close 155 Degree Opening Hinge for Screw Installation, Nickel
120 Degree CLIP Top Hinge, Self-Close, Full Overlay, Screw-on (Replacement for 90.155, 90.555, 84.555, 70.555, 71.155)
Clip-Top BLUMOTION Full Overlay Soft-Close 95 Degree Opening Hinge for Screw Installation, Replaces Hinges 70.955, 84.955, and 90.955, Nickel
Clip 100 Degree Hinge Overlay / Self-Closing (Replacement for 70.255, 90.255, 84.255)
Blum Cliptop Soft-Closing Inset Door Blind Corner Hinge, 95 Degree Opening Angle
Clip-Top Thick Door BLUMOTION Full Inset Soft-Close 95 Degree Opening Hinge for Screw Installation, Nickel
CLIP top Inset BLUMOTION Soft-Close 110 Degree Opening Hinge, Inserta Tool-Free Mounting, Full Inset using 0mm Mounting Plates, Nickel
CLIP Top Inset Self-Close Screw On Hinge, Full Inset using 0mm Mounting Plates (Sold Separately), Nickel
CLIP Top BLUMOTION Soft Close 125 Degree Opening Screw-on Full Overlay Zero Protrusion Hinge for Screw Installation, Nickel
Clip-top 95 Degree Self-Closing Thick Door Full Inset Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore,(Replacement for 70.955, 84.955, 90.955)
+45 II Degree Cliptop Full-Overlay Blumotion Soft-Close Hinge, Inserta 3-hole mounting
Cliptop 110 degree Hinge Partial Overlay/Self Closing
Blum Clip-Top Self-Close Partial Overlay 170 Degree Opening Hinge, Screw-On Mounting, Nickel
Blum Clip-On Full Overlay Self-Closing 120 Degree Opening Hinge, Inserta "Tool-Less" Installation, Nickel
Clip-top 95 Degree Self-Closing Thick Door Full Overlay Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore,(Replacement for 70.955, 84.955, 90.955)
Cliptop Inserta 110 Degree Opening Soft-Close Blumotion Hinge, Partial (1/4 to 5/16 Inch Overlay using 0mm Mounting Plate, Tool-Free, 3-Hole Hinge Boring Required
Blum Clip Full Inset Free-Swing/Unsprung Hinge, 110-Degree Opening, 35mm Bore, Dowel 3-Hole Mounting, Touch/Tip-On Latch Required
Blum Full-Overlay Soft-Close Blind-Corner Hinge, 95 Degree Opening Angle, Dowel or Screw Mounted
Blum Clip-On Full Overlay Self-Closing 110 Degree Opening Hinge, Inserta "Tool-Less" Installation, Nickel
110 degree Cliptop Full Overlay/Self-Closing
CLIP top BLUMOTION 110 Degree Hinge EXPANDO Overlay, Soft Closing
Clip-Top BLUMOTION Full Overlay Soft-Close 110 Degree Opening Hinge including Dowels, Nickel
Cliptop 94 Degree Mini Hinge Overlay / Self-Closing
Cliptop 94 Degree Mini Hinge Inset / Self-Closing
Blum Clip Full Overlay Free-Swing/Unsprung Hinge,100-Degree Opening, 35mm Bore, Screw-On Mounting, Touch/Tip-On Latch Required
Cliptop Inserta 110 Degree + Opening Soft-Close Blumotion Hinge, 11/16 to 13/16 Inch Overlay using 0mm Mounting Plate, Tool-Free, 3-Hole Hinge Boring Required
Cliptop Inserta 95 Degree Opening Thick Door Soft-Close Blumotion Hinge, Full Overlay using 0mm Mounting Plate, 1-3/16" Maximum Door Thickness, Tool-Free 3-Hole Hinge Boring Required
Clip-Top BLUMOTION Partial Overlay Soft-Close 95 Degree Opening Hinge for Screw Installation, Nickel
Blum Clip-Top Self-Close Full Overlay 170 Degree Opening Hinge, Inserta Tool-Free Mounting, Nickel
Blum Clip Full Inset Free-Swing/Unsprung Hinge,100-Degree Opening, 35mm Bore, Screw-On Mounting, Touch/Tip-On Latch Required
Blum Clip-On Full Overlay Plus Self-Closing 110 + Degree Opening Hinge for Larger Overlays, Inserta "Tool-Less" Installation, Nickel
Blum Clip 95-Degree Thick Door Full Inset Free-Swing/Unsprung Hinge for 3/4" to 1-3/16" Thickness Doors, Screw-On Mounting, Touch/Tip-On Latch Required
Clip-top 107 Degree Hinge Overlay / Self-Closing
95 Degree Cliptop Blind Corner Overlay Self-Closing Inserta
CLIP Top BLUMOTION Soft Close 155 Degree Opening Screw-on Full Overlay Zero Protrusion Hinge for Screw Installation, Black Onyx
95 Degree Cliptop Blind Corner Inset Self-Closing
Blum Clip-On Full Overlay Plus Self-Closing 120 + Degree Opening Hinge for Larger Overlays, Inserta "Tool-Less" Installation, Nickel
Blum Clip Partial/Half Overlay Free-Swing/Unsprung Hinge,170-Degree Opening, 35mm Bore, Screw Mounting, Touch/Tip-On Latch Required, Nickel
Clip 100 Degree Hinge Inset / Self-Closing
Blum Clip Full-Overlay Thick Door Free-Swing/Unsprung Hinge for 5/8" to 1-1/4" Door Thickness, 35mm Bore, Screw-On Mounting, Touch/Tip-On Latch Required