Blum Clip Full Inset Free-Swing/Unsprung Hinge, 110-Degree Opening, 35mm Bore, Dowel 3-Hole Mounting, Touch/Tip-On Latch Required
Ends Nov 12
Degree of Opening / Overlay:
Mounting Type / Closing Type:
Save more! Buy a Pro Pack.
Large Project?
Orders $2500+ Qualify for Special Discounts.
Build your item list and get a Quick Quote
view bid cartAll the product info you could ask for...
-
Size Info
- Bore Diameter : 35MM
- Cup Depth : 13MM
- Installation Note : Set back mounting plate screw-on position by door thickness +1.5 mm.
-
Manufacturer Info
- Manufacturer : Blum
- Manufacturer Part # : 70T3750.TL
-
Other Important Info
- Degree of Opening / Overlay : 110 Degree / Inset
- Cabinet Application : Frameless
- Closing Type : Free Swinging
- Mounting Type : Screw On
- Product Finish : Nickel Plated
- Material : Steel
- Includes : (1) Hinge
- Mounting Type / Closing Type : Screw On / Free Swinging
- Overlay : Inset
- Degree of Opening : 110
- Product Type : Long Arm Hinge
- Installation Note : Includes dowels for 3-hole pre-bore; remove for screw-on. #6 × 5/8" flat-head screws required.
Manufacturer Resources
Required for Installation-Recessed Piston and Strike Plate
Surface-Mount Bracket- Piston and Bracket must be from the same Manufacturer
Surface-Mounted Touch-Latches
If Measured Overlay is 18-19MM (11/16"-3/4") use these Mounting Plates for Frameless Applications
Installation Hardware
Compatible Hinges
Other - 110 Degree European Cabinet Hinges
Our customers say Blum products...
based on 2223 ratings
- 5 of 5 Great company August 9th, 2021
by MATT from Bloomfield Hills, MIThey were delivered early everything was in the box we ordered. Installed on our doors they work great easily adjustable. Good company to deal with very helpful and knowledgeable.
- 0 of 1 people found the following review helpful
3 of 5 Average March 29th, 2016
by Thomas from Nisswa, MNFirst time I have bought hinges and did not get screws with them.
- 2 of 5 Disappointed with these hinges November 4th, 2026
by Mark from Land O Lakes, FLThe hinges were listed as " full overlay", however when I tried to adjust them more than 5/8" the mechanism hits the side of the cabinet frame. If you adjust it any further the mechanism binds and the door will not close. I had to cut a small notch 1/8" deep behind each hinge in order to be able to adjust them to the full 3/4"
This review is about a different size/color of this item. (BH70M2550)
- 5 of 5 Great for Inset Doors November 4th, 2026
by Bill from Birmingham, ALI have used this hinge with the recommended clip many times for installing inset hinges. It is a perfect fit for that application. I keep a box of them in my shop all the time.
This review is about a different size/color of this item. (BH71B3750)
- 5 of 5 Perfect Replacements October 21st, 2026
by Christopher from Scottsdale, AZThe parts perfectly replaced existing parts that had wore out...Thank you!!!
This review is about a different size/color of this item. (BH71T0650)
Reviews about us...
- 5 of 5 | November 8th, 2026
The soft close Cabinet hinges were perfect.
- 5 of 5 | November 7th, 2026
Glides are great and the purchase experience was straight forward!
- 5 of 5 | November 7th, 2026
I needed some help on my cabinets with hinges. Sherry was there every step of the way. Fantastic service!
- 5 of 5 | November 6th, 2026
Had the products and delivered quickly
- 5 of 5 | November 6th, 2026
Attractive and solidly made back plates in brushed nickel finish. They fit perfectly and don’t show finger marks.
Grass Tipmatic Magnetic Push-Latch for Touch-To-Open Applications without Handles, Platinum Gray
Tip On, Touch-Latch, Set For Standard Free-Swinging Doors without Soft or Self-Closing Hinges
Tip-On Unit for Doors Under 48 Inch Tall, Silk White
Tip-On Unit for Doors Under 48 Inch Tall, Carbon Black
Linear Adapter Plate for TIOMOS and Airmatic Magnetic Push-Latch, Platinum Gray
Wing Adapter Plate for TIOMOS and Airmatic Magnetic Push-Latch, Platinum Gray
Standard Door Inline Adapter (NOT for use with 956A1006), Terra Black
Standard Door Inline Adapter (NOT for use with 956A1006), Silk White
Standard Door Inline Adapter (NOT for use with 956A1006), Nickel
Push to Open 2-Door Magnetic Door Touch Latch, 2-1/4 Inch Width x 1-13/16 Depth, Throw Distance 7/16 Inch, White
Futaba Push to Open Single Door Magnetic Touch Latch, 1-1/8 Inch Width x 1-13/16 Depth, Throw Distance 7/16 Inch, White
Push to Open 2-Door Magnetic Door Touch Latch, 2-15/16 Inch Width x 1-17/32 Inch Depth,13/32 Inch (8.5mm)Distance Throw, White
Push to Open 2-Door Magnetic Door Touch Latch, 2-15/16 Inch Width x 1-17/32 Inch Depth,13/32 Inch (8.5mm) Distance Throw, Brown
Push to Open "Long Stroke" Magnetic Door Touch Latch for Medium Size Doors, Pushes Door Out 1-1/2 Inch (40mm), Black
Blum 0mm Height Clip 2-piece Frameless Mounting Plate for Wood Screw Mounting
Blum 0mm Height Clip 2-piece Frameless Mounting Plate for Euro-Screw (Pozi) Mounting
Blum 0mm Height Clip 1 Piece Frameless Mounting Plate for Wood Screw Mounting
Blum 0mm Height Clip 1 Piece Frameless Mounting Plate for 5mm Euro (Pozi) Screw Mounting
Blum 0mm Height Clip 1 Piece Frameless Mounting Plate for Euro-screw (Pozi) Screw Mounting
Blum 0mm Height Clip Cam Adjustable 2-piece Frameless Mounting Plate for Wood Screw Mounting
Blum 0mm Height Clip Cam Adjustable 2-piece Frameless Wing Mounting Plate with Expando Dowel Mounting
#6 x 5/8 inch Flat Head Hinge Screws (25 Pack)
Professional Self-Centering Vix Bit, Essential Drill Bit for Hinge Installation
#10 x 5/8 inch Pan Head Screws (25 Pack)
35MM Boring Bit Right Hand
Blum #2 Pozi Screwdriver for Hinge Adjustment and Installation Screws
Clip-Top BLUMOTION Full Overlay Soft-Close 110 Degree Opening Hinge for Screw Installation, Nickel
Clip-Top BLUMOTION Full Inset Soft-Close 110 Degree Opening Hinge for Screw Installation, Nickel
Clip-Top BLUMOTION Plus Full Overlay Soft-Close 110+ Degree Opening Hinge for Larger Overlays, Screw Installation, Nickel
Clip-Top BLUMOTION Partial Overlay Soft-Close 110 Degree Opening Hinge for Screw Installation, Nickel
Cliptop 110 Degree Hinge Overlay/Self-Closing (Replacement for 70.355, 84.355, 90.355)
Cliptop Inserta 110 Degree Opening Soft-Close Blumotion Hinge, Full Overlay using 0mm Mounting Plate, Tool-Free, 3-Hole Hinge Boring Required
Nexis Screw On 110 degree Full Overlay Hinge, Self Close
Grass Tiomos Full Overlay Soft Close Hinge, 110 Degree Opening Angle, Screw-on Mounting
Nexis Dowelled 110 degree Pie Cut Corner Hinge, Self Close
Builders Line Long Arm Hinge, 110 Degree Soft Close Clip Hinge, Cam Adjustable, Full Overlay with 8mm Dowels
CLIP top Inset BLUMOTION Soft-Close 110 Degree Opening Hinge, Inserta Tool-Free Mounting, Full Inset using 0mm Mounting Plates, Nickel
CLIP Top Inset Self-Close Screw On Hinge, Full Inset using 0mm Mounting Plates (Sold Separately), Nickel
Grass Tiomos Partial Overlay Hinge Soft Close Hinge, 110 Degree Opening Angle, Screw-on Mounting (Replacement for 1006, 3703 ** See Details)
Grass Tiomos Full Inset Hinge Soft Close Hinge, 110 Degree Opening Angle, Screw-on Mounting
Cliptop 110 degree Hinge Partial Overlay/Self Closing
Builders Line Long Arm Hinge, 110 Degree Soft Close Clip Hinge, Cam Adjustable, Full Overlay
Cliptop Inserta 110 Degree Opening Soft-Close Blumotion Hinge, Partial (1/4 to 5/16 Inch Overlay using 0mm Mounting Plate, Tool-Free, 3-Hole Hinge Boring Required
Builders Line Long Arm Hinge, 110 Degree Soft Close Clip Hinge, Cam Adjustable, Inset
Blum Clip Full Inset Free-Swing/Unsprung Hinge, 110-Degree Opening, 35mm Bore, Dowel 3-Hole Mounting, Touch/Tip-On Latch Required
Grass Tiomos Standard Overlay Hinge Soft Close Hinge, 110 Degree Opening Angle, Screw-on Mounting (Replacement for 1006, 3703 ** See Details)
Clip-Top BLUMOTION Full Overlay Soft-Close 110 Degree Opening Hinge including Dowels, Nickel
Blum Clip-On Full Overlay Self-Closing 110 Degree Opening Hinge, Inserta "Tool-Less" Installation, Nickel
110 degree Cliptop Full Overlay/Self-Closing
Salice Silentia+ Full Inset Soft Close Hinge for Thick Doors up to 1-9/16" Thickness, Screw-On Mounting, 40mm Drilling Required
CLIP top BLUMOTION 110 Degree Hinge EXPANDO Overlay, Soft Closing
Grass Tiomos Full Overlay Self-Close (Spring) Hinge, 110 Degree Opening Angle, Screw-on Mounting (Replacement for 3603, 1806 ** See Details)
Cliptop Inserta 110 Degree + Opening Soft-Close Blumotion Hinge, 11/16 to 13/16 Inch Overlay using 0mm Mounting Plate, Tool-Free, 3-Hole Hinge Boring Required
Nexis Screw On 110 degree Half Overlay Hinge, Self Close
Tiomos Impresso 110 Degree Overlay Hinge, Soft Close
Salice 110 Degree Full Overlay Free Swing Hinge
Salice Silentia+ Full-Overlay Soft Close Hinge for Thick Doors up to 1-9/16" Thickness, Screw-On, 40mm Drilling Required
Blum Clip-On Full Overlay Plus Self-Closing 110 + Degree Opening Hinge for Larger Overlays, Inserta "Tool-Less" Installation, Nickel
Grass Tiomos Full Inset Self-Close (Spring) Hinge, 110 Degree Opening Angle, Screw-on Mounting (Replacement for 3603, 1806 ** See Details)
Grass Tiomos Grey Plastic Hinge Clip Protector
Builders Line Long Arm Hinge, 110 Degree Soft Close Clip Hinge, Cam Adjustable, Half Overlay
Clip-Top BLUMOTION Full Overlay Soft-Close 110 + Degree Opening Hinge for Larger Overlays, includes Dowels, Nickel
Salice Silentia+ Partial-Overlay Soft Close Hinge for Thick Doors up to 1-9/16" Thickness, Screw-On, 40mm Drilling Required
Salice Series B Special Application Soft-Close Hinge for 3/8 x 3/8" Lipped and Thicker Molded Edge Doors, 110-Degree Opening Angle
Salice 94-Degree Opening Full-Overlay Hinge, Self-Closing for Screw-On Mounting, Nickel Plated
Clip-Top BLUMOTION Full Inset Soft-Close 110 Degree Opening Hinge including Dowels, Nickel
Blum Clip-On Inset Self-Closing 110 Degree Opening Hinge, Inserta "Tool-Less" Installation, Nickel
Cliptop 110 Degree Hinge Overlay/Free Swing with Dowel
Tiomos Impresso 110 degree Inset Hinge, Soft Close
Grass Tiomos Standard Full Overlay Overlay Self-Close (Spring) Hinge, 110 Degree Opening Angle, Screw-on Mounting (Replacement for 3603, 1806 ** See Details)
Tiomos 110 degree Screw On Overlay Blind Corner Hinge, Soft Closing
Salice Duomatic Full Overlay "Universal" Push-to-Open Glass and Mirror "Thin-Door" Hinge, No Glass Drilling Required, 110 Degree Opening Angle
110 degree Cliptop Full Overlay/Self-Closing-Dowel
Salice 110-Degree Self-Close Partial 1/4 to 3/8 Inch Overlay Hinge for Screw-On Mounting, Nickel Plated