Salice 94 degree Silentia Thick Door Half Overlay Screw On Hinge
Product Discontinuation AlertThis item has left our catalog. It's either upgraded to a newer model, didn't meet our high customer satisfaction standards, or the manufacturer said goodbye. But don't worry, CabinetParts is always here with top-notch alternatives.All the product info you could ask for...
-
Size Info
- Cup Depth : 15.5MM
- Bore Diameter : 35MM
-
Manufacturer Info
- Manufacturer : Salice
- Manufacturer Part # : C2RBAE9
-
Other Important Info
- Product Finish : Nickel Plated
- Includes : (1) Hinge
- Overlay : Partial Overlay
- Degree of Opening : 94
- Mounting Type : Screw On
- Closing Type : Soft Closing
- Product Type : Long Arm Hinge
- Material : Steel
- Cabinet Application : Frameless
Manufacturer Resources
Installation Hardware
If Measured Overlay is 3-3.5MM (1/8") use these Mounting Plates for Face Frame Applications
If Measured Overlay is 10MM (3/8") use these Mounting Plates for Face Frame Applications
Other - 95 Degree European Cabinet Hinges
Our customers say Salice products...
based on 562 ratings
- 1 of 1 people found the following review helpful
5 of 5 Great find. July 13th, 2026
by Jessica from Lafayette, LAThese were the only hinges we could locate for a less than normal door thickness. The measurements were clearly posted and made it very helpful to order. Installed and worked great!
This review is about similar Salice Hinges. (SH-C1P6A99)
- 1 of 1 people found the following review helpful
5 of 5 Finally found the right hinge June 1st, 2026
by Tara from Vancouver, WANeeded to replace some worn out hinges and struggled to find the right ones. Finally found the right ones, shipping was fast and purchasing was easy. Will be ordering more!
This review is about similar Salice Hinges. (SH-C1P6DD9)
- 1 of 1 people found the following review helpful
5 of 5 works! April 21st, 2026
by Nathan from Santa Barbara, CAmounting plate seems like good quality and worked perfectly.
This review is about similar Salice Hinges. (SH-BAR3R09)
- 1 of 1 people found the following review helpful
5 of 5 Hinge Replcement April 6th, 2026
by Warren from Silver Spring, MDThese hinges worked perfectly. I replaced a single broken hinge, as well as the other 3 hinges, on 2 cabinet doors with these soft close hinges. No more slamming of cabinet doors!!! My ears and nerves are happier!!!
This review is about similar Salice Hinges. (SH-C1P6DD9)
- 1 of 5 Wrong finish July 21st, 2026
by Jeffery from Lodi, CAI ordered hinges with the same finish as the one pictured on this page, the finish on the hinges that were sent was dark.
This review is about similar Salice Hinges. (SH-CUR37D6R)
Reviews about us...
- 5 of 5 | September 29th, 2026
They had the replacement part and delivered it quickly. Very happy with Cabinet Parts.
- 4 of 5 | September 28th, 2026
I love the heft and look of the bronze plates. My only concern is with the mounting screws. For such a large plate and for security matters the screws are only 1/2 inch long. They would be easy to pry off. I have bought 1 inch screws, (the longest that wo
- 4 of 5 | September 27th, 2026
we had significant difficulty deciphering the measurements needed. Cabinet parts develop drawings to illustrate the needed dimensions.
- 5 of 5 | September 27th, 2026
And fast shipping . Thank you!
- 5 of 5 | September 26th, 2026
I’ve been looking for these parts and you delivered! Thanks
#6 x 5/8 inch Flat Head Hinge Screws (25 Pack)
Professional Self-Centering Vix Bit, Essential Drill Bit for Hinge Installation
#10 x 5/8 inch Pan Head Screws (25 Pack)
35MM Boring Bit Right Hand
Blum #2 Pozi Screwdriver for Hinge Adjustment and Installation Screws
1/2 Inch Overlay Clip Face Frame Plate for Woodscrews 4mm Mod 6, Nickel
Salice 4mm Face Frame Mounting Plate for Wood Screw Mounting, 1/2" Overlay with Full Overlay Hinge, Nickel Plated Steel
Salice Face Frame Mounting Plate for Wood Screws, 4mm, 1/2" Overlay with Full Overlay Hinge, Mod 6, Titanium
Salice 1mm Height Face Frame Clip Mounting Plate for Screw-On Mounting, Zinc/Nickel Plated
Salice 0mm Face Frame Mounting Plate for Wood Screw Mounting, 3/4-Inch Overlay with Full Overlay Hinge, Nickel Plated Steel
3/4 Inch Overlay Clip Face Frame Plate for Woodscrews 1mm Mod 3, Nickel
Salice 1mm Thickness Face Frame Mounting Plate for Screw Installation, Mod 3, Titanium
Clip-Top BLUMOTION Full Overlay Soft-Close 95 Degree Opening Hinge for Screw Installation, Replaces Hinges 70.955, 84.955, and 90.955, Nickel
Blum Cliptop Soft-Closing Inset Door Blind Corner Hinge, 95 Degree Opening Angle
Clip-Top Thick Door BLUMOTION Full Inset Soft-Close 95 Degree Opening Hinge for Screw Installation, Nickel
Clip-top 95 Degree Self-Closing Thick Door Full Overlay Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore,(Replacement for 70.955, 84.955, 90.955)
Clip-top 95 Degree Self-Closing Thick Door Full Inset Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore,(Replacement for 70.955, 84.955, 90.955)
Blum Full-Overlay Soft-Close Blind-Corner Hinge, 95 Degree Opening Angle, Dowel or Screw Mounted
Cliptop Inserta 95 Degree Opening Thick Door Soft-Close Blumotion Hinge, Full Overlay using 0mm Mounting Plate, 1-3/16" Maximum Door Thickness, Tool-Free 3-Hole Hinge Boring Required
Clip-Top BLUMOTION Partial Overlay Soft-Close 95 Degree Opening Hinge for Screw Installation, Nickel
Blum Clip 95-Degree Thick Door Full Inset Free-Swing/Unsprung Hinge for 3/4" to 1-3/16" Thickness Doors, Screw-On Mounting, Touch/Tip-On Latch Required
95 Degree Cliptop Blind Corner Overlay Self-Closing Inserta
Clip-top 95 Degree Self-Closing Thick Door Partial Overlay Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore,(Replacement for 70.955, 84.955, 90.955)
Blum Clip Full-Overlay Thick Door Free-Swing/Unsprung Hinge for 5/8" to 1-1/4" Door Thickness, 35mm Bore, Screw-On Mounting, Touch/Tip-On Latch Required
95 Degree Cliptop Blind Corner Inset Self-Closing
Clip-top 95 Degree Self-Closing Thick Door Full Inset Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore, Screw-On or Dowel Mounting (Replacement for 70.955, 84.955, 90.955)
Blum Inserta Inset Blind Corner Soft-Close Hinge, 95 Degree Opening Angle for Tool-Free, 3-Hole Installation
Blum 94 Degree Self-Closing Screw Mount Inset Glass Door Hinge including Cover Cap Screws, 0mm Mounting Plate Required
Cliptop Inserta 95 Degree Opening Soft-Close Blumotion Hinge, Full Inset using 0mm Mounting Plate, Tool-Free, 3-Hole Hinge Boring Required
Salice Silentia Thick Door 94-Degree Opening Soft-Close Full Overlay Hinge for Screw-On Mounting, Door Widths 11/16 to 1-3/8, Nickel Plated
Cliptop Full Inset Inserta Thick Door 95 Degree Opening Self Close Blumotion Hinge, Door Thickness up to 1-3/16 Inch, 3-Hole Hinge Boring Required
Clip-top 95 Degree Thick Door Hinge Partial Overlay / Free-Swing
Grass Tiomos Standard Full Overlay Soft Close Hinge, 95 Degree Opening Angle, Screw-on Mounting
Clip-Top BLUMOTION Full Overlay Soft-Close 95 Degree Opening Hinge including Dowels, Nickel
Grass Tiomos Full Inset Soft Close Hinge, 95 Degree Opening Angle, Screw-on Mounting
Grass Tiomos Full Inset Self-Close (Spring) Hinge, 95 Degree Opening Angle, Screw-on Mounting
95 Degree Cliptop Blind Corner Inset Self-Closing, Inserta
Grass Tiomos Standard Full Overlay Self-Close (Spring) Hinge, 95 Degree Opening Angle, Screw-on Mounting (Replacement for 3603, 1806 ** See Details)
Grass Tiomos Full Overlay Soft Close Hinge, 95 Degree Opening Angle, Screw-on Mounting (Replacement for 3606, 1806 ** See Details)
Blum 94 Degree Self-Closing Screw Mount Full Overlay Glass Door Hinge including Cover Cap Screws, 0mm Mounting Plate Required for Full Overlay
Cliptop Inserta 95 Degree Opening Soft-Close Blumotion Hinge, Partial (1/4 to 5/16 Inch Overlay using 0mm Mounting Plate, Tool-Free, 3-Hole Hinge Boring Required
95 Degree Cliptop Blumotion Blind Corner Inset-Soft-Close
Clip-top 95 Degree Self-Closing Thick Door Full Overlay Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore, Screw-On or Dowel Mounting (Replacement for 70.955, 84.955, 90.955)
Clip-top 95 Degree Thick Door Full Overlay Free-Swing (Unsprung) Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore, Screw-On or Dowel Mounting (Replacement for 70.955, 84.955, 90.955)
Cliptop Full Overlay Inserta Thick Door 95 Degree Opening Self-Close Hinge, Door Thickness up to 1-3/16 Inch, 3-Hole Hinge Boring Required
Clip-Top BLUMOTION Full Inset Soft-Close 95 Degree Opening Hinge including Dowels, Nickel
Nexis Screw On 95 degree Full Overlay Hinge, Self Close
Clip-top 95 Degree Self-Closing Thick Door Partial Overlay Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore, Screw-On or Dowel Mounting (Replacement for 70.955, 84.955, 90.955)
Blum 94 Degree Self-Closing Screw Mount Partial Overlay Glass Door Hinge including Cover Cap Screws, 0mm Mounting Plate Required for Partial (approx. 5/16") Overlay
95 Degree Cliptop Blind Corner Inset-Self-Closing-Dowel
Cliptop Full Inset Inserta Thick Door 95 Degree Opening Self-Close Hinge, Door Thickness up to 1-3/16 Inch, 3-Hole Hinge Boring Required
Nexis Inset Screw On 95 degree 40MM Hinge- Self Close
Clip-Top BLUMOTION Partial Overlay Soft-Close 95 Degree Opening Hinge including Dowels, Nickel
0MM Clip Inline Mounting Plate
Round Glass Door Cover Cap, Chrome
Round Glass Door Cover Cap, Black
Grass Tiomos Full Overlay Hinge Self-Close (Spring) Hinge, 95 Degree Opening Angle, Screw-on Mounting
3606 Full Overlay 95 Degree Self-Closing Hinge
Nexis Screw On 95 degree Half Overlay Hinge, Self Close
Nexis Inset Screw On 95 degree Thick Door Hinge, Self Close