Salice 155 Degree Silentia Zero Protrusion Full Overlay Hinge Dowel
Product Discontinuation AlertThis item has left our catalog. It's either upgraded to a newer model, didn't meet our high customer satisfaction standards, or the manufacturer said goodbye. But don't worry, CabinetParts is always here with top-notch alternatives.All the product info you could ask for...
-
Size Info
- Cup Depth : 13.5MM
- Bore Diameter : 35MM
-
Manufacturer Info
- Manufacturer : Salice
- Manufacturer Part # : C2RMAD9
-
Other Important Info
- Overlay : Full Overlay
- Degree of Opening : 155
- Product Type : Long Arm Hinge
- Product Finish : Nickel Plated
- Includes : (1) Hinge
- Mounting Type : Dowel Mount
- Closing Type : Soft Closing
- Material : Steel
- Cabinet Application : Frameless
Manufacturer Resources
Installation Hardware
If Measured Overlay is 16MM (5/8") use these Mounting Plates for Face Frame Applications
If Measured Overlay is 13MM (1/2") use these Mounting Plates for Frameless Applications
If Measured Overlay is 18-19MM (11/16"-3/4") use these Mounting Plates for Frameless Applications
If Measured Overlay is 16-17MM (5/8"-11/16") use these Mounting Plates for Frameless Applications
If Measured Overlay is 13MM (1/2") use these Mounting Plates for Face Frame Applications
Other - 95 Degree European Cabinet Hinges
Our customers say Salice products...
based on 562 ratings
- 5 of 5 Finally found the right hinge June 1st, 2026
by Tara from Vancouver, WANeeded to replace some worn out hinges and struggled to find the right ones. Finally found the right ones, shipping was fast and purchasing was easy. Will be ordering more!
This review is about similar Salice Hinges. (SH-C1P6DD9)
- 1 of 5 Did not fit cabinet May 21st, 2026
by Vikram from Newark, CAI asked if this is going to fit my cabinet and was told it will be a perfect match - alas when it came it did not fit
This review is about similar Salice Hinges. (SH-C2R6A99)
- 5 of 5 Perfect April 21st, 2026
by Nathan from Santa Barbara, CAGreat hinge.
This review is about similar Salice Hinges. (SH-CFA7P)
- 5 of 5 works! April 21st, 2026
by Nathan from Santa Barbara, CAmounting plate seems like good quality and worked perfectly.
This review is about similar Salice Hinges. (SH-BAR3R09)
- 5 of 5 Hinge Replcement April 6th, 2026
by Warren from Silver Spring, MDThese hinges worked perfectly. I replaced a single broken hinge, as well as the other 3 hinges, on 2 cabinet doors with these soft close hinges. No more slamming of cabinet doors!!! My ears and nerves are happier!!!
This review is about similar Salice Hinges. (SH-C1P6DD9)
Reviews about us...
- 5 of 5 | June 19th, 2026
Ordered the wrong parts and they were great fixing my issue. Will be my go to from now till on
- 5 of 5 | June 19th, 2026
Good service. Had parts i needed in couple of days.
- 5 of 5 | June 19th, 2026
Tried finding the hinges elsewhere. Found them right away. Perfect match.
- 4 of 5 | June 18th, 2026
I was able to find the exact hinge needed to replace broken hidden Soss hinges in a Martha Washington cabinet. The price was reasonable. It did take a while to ship out (ordered May 15, shipping notice June 2) but then arrived quickly once shipped.
- 5 of 5 | June 18th, 2026
I have looked and looked for replacement parts for my cabinets and was about to give up hope, but thankfully they had the exact parts I needed. They arrived quickly, reasonably priced and I am thrilled.
#6 x 5/8 inch Flat Head Hinge Screws (25 Pack)
Professional Self-Centering Vix Bit, Essential Drill Bit for Hinge Installation
#10 x 5/8 inch Pan Head Screws (25 Pack)
35MM Boring Bit Right Hand
Blum #2 Pozi Screwdriver for Hinge Adjustment and Installation Screws
Salice 1mm Height Face Frame Clip Mounting Plate for Screw-On Mounting, Zinc/Nickel Plated
Salice 0mm Face Frame Mounting Plate for Wood Screw Mounting, 3/4-Inch Overlay with Full Overlay Hinge, Nickel Plated Steel
3/4 Inch Overlay Clip Face Frame Plate for Woodscrews 1mm Mod 3, Nickel
Salice 1mm Thickness Face Frame Mounting Plate for Screw Installation, Mod 3, Titanium
Salice 6mm Height Frameless Clip Mounting Plate for Pozi/Euro Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 6mm Height Frameless Clip Mounting Plate with Pre-Installed 11mm Euro Screws, Mod 8, Nickel Plated
Salice 0mm Height Frameless Clip Wing Mounting Plate for Screw Mounting, Mod 29
Salice 0mm Frameless Wing Mounting Plate for Screw-On Mounting, Nickel Plated Steel
Salice 2mm Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 0mm Frameless Wing Mounting Plate with Pre-Mounted Anchors and Screws , Nickel Plated Steel
Salice 0mm Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
Salice 0mm Clip Frameless Mounting Plate For Woodscrew Mounting, Nickel Plated
Salice 0mm Frameless Concealed Mounting Plate for Screw-On Mounting , Nickel Plated Steel
Cruciform Slide-On Frameless Mounting Plate For Woodscrews 0mm Mod 2, Nickel
Salice 2mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Salice 3mm Height Frameless Clip Mounting Plate for Screw-On Mounting Including Integral Depth Adjustment, Mod 29
Frameless Clip Mounting Plate with Pre-Installed 11mm Euroscrews 3mm Mod 5, Nickel
Salice 3mm Frameless Wing Mounting Plate for Screw-On Installation, Nickel Plated Steel
Salice 3mm Height Frameless Wing Mounting Plate with Pre-Mounted 6.3mm Diameter Euro (POZI) Screws , Nickel Plated Steel
1/2 Inch Overlay Clip Face Frame Plate for Woodscrews 4mm Mod 6, Nickel
Salice 4mm Face Frame Mounting Plate for Wood Screw Mounting, 1/2" Overlay with Full Overlay Hinge, Nickel Plated Steel
Salice Face Frame Mounting Plate for Wood Screws, 4mm, 1/2" Overlay with Full Overlay Hinge, Mod 6, Titanium
Clip-Top BLUMOTION Full Overlay Soft-Close 95 Degree Opening Hinge for Screw Installation, Replaces Hinges 70.955, 84.955, and 90.955, Nickel
Blum Cliptop Soft-Closing Inset Door Blind Corner Hinge, 95 Degree Opening Angle
Clip-Top BLUMOTION Full Inset Soft-Close 95 Degree Opening Hinge for Screw Installation, Nickel
Clip-top 95 Degree Self-Closing Thick Door Full Overlay Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore,(Replacement for 70.955, 84.955, 90.955)
Clip-top 95 Degree Self-Closing Thick Door Full Inset Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore,(Replacement for 70.955, 84.955, 90.955)
Blum Full-Overlay Soft-Close Blind-Corner Hinge, 95 Degree Opening Angle, Dowel or Screw Mounted
Clip-top 95 Degree Thick Door Hinge Inset/Free-Swing
Cliptop Inserta 95 Degree Opening Soft-Close Blumotion Hinge, Full Overlay using 0mm Mounting Plate, Tool-Free, 3-Hole Hinge Boring Required
95 Degree Cliptop Blind Corner Overlay Self-Closing Inserta
Clip-Top BLUMOTION Partial Overlay Soft-Close 95 Degree Opening Hinge for Screw Installation, Nickel
Blum 94 Degree Self-Closing Screw Mount Inset Glass Door Hinge including Cover Cap Screws, 0mm Mounting Plate Required
95 Degree Cliptop Blind Corner Inset Self-Closing
Blum Inserta Inset Blind Corner Soft-Close Hinge, 95 Degree Opening Angle for Tool-Free, 3-Hole Installation
Cliptop Inserta 95 Degree Opening Soft-Close Blumotion Hinge, Full Inset using 0mm Mounting Plate, Tool-Free, 3-Hole Hinge Boring Required
Salice Silentia Thick Door 94-Degree Opening Soft-Close Full Overlay Hinge for Screw-On Mounting, Door Widths 11/16 to 1-3/8, Nickel Plated
Grass Tiomos Full Inset Soft Close Hinge, 95 Degree Opening Angle, Screw-on Mounting
Clip-top 95 Degree Self-Closing Thick Door Partial Overlay Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore,(Replacement for 70.955, 84.955, 90.955)
Clip-top 95 Degree Self-Closing Thick Door Full Overlay Free-Swing (Unsprung) Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore, Screw-On Mounting (Replacement for 70.955, 84.955, 90.955)
Clip-top 95 Degree Self-Closing Thick Door Full Inset Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore, Screw-On or Dowel Mounting (Replacement for 70.955, 84.955, 90.955)
Cliptop Full Inset Inserta Thick Door 95 Degree Opening Self Close Blumotion Hinge, Door Thickness up to 1-3/16 Inch, 3-Hole Hinge Boring Required
Grass Tiomos Full Inset Self-Close (Spring) Hinge, 95 Degree Opening Angle, Screw-on Mounting
Cliptop Inserta 95 Degree Opening Soft-Close Blumotion Hinge, Partial (1/4 to 5/16 Inch Overlay using 0mm Mounting Plate, Tool-Free, 3-Hole Hinge Boring Required
Nexis Screw On 95 degree Full Overlay Hinge, Self Close
Grass Tiomos Full Overlay Soft Close Hinge, 95 Degree Opening Angle, Screw-on Mounting (Replacement for 3606, 1806 ** See Details)
Clip-top 95 Degree Thick Door Hinge Partial Overlay / Free-Swing
95 Degree Cliptop Blind Corner Inset Self-Closing, Inserta
Cliptop Full Overlay Inserta Thick Door 95 Degree Opening Self-Close Hinge, Door Thickness up to 1-3/16 Inch, 3-Hole Hinge Boring Required
Blum 94 Degree Self-Closing Screw Mount Full Overlay Glass Door Hinge including Cover Cap Screws, 0mm Mounting Plate Required for Full Overlay
95 Degree Cliptop Blumotion Blind Corner Inset-Soft-Close
Clip-Top BLUMOTION Full Inset Soft-Close 95 Degree Opening Hinge including Dowels, Nickel
Grass Tiomos Standard Full Overlay Self-Close (Spring) Hinge, 95 Degree Opening Angle, Screw-on Mounting (Replacement for 3603, 1806 ** See Details)
Grass Tiomos Standard Full Overlay Soft Close Hinge, 95 Degree Opening Angle, Screw-on Mounting
Clip-top 95 Degree Thick Door Full Overlay Free-Swing (Unsprung) Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore, Screw-On or Dowel Mounting (Replacement for 70.955, 84.955, 90.955)
Clip-Top BLUMOTION Full Overlay Soft-Close 95 Degree Opening Hinge including Dowels, Nickel
Blum 94 Degree Self-Closing Screw Mount Partial Overlay Glass Door Hinge including Cover Cap Screws, 0mm Mounting Plate Required for Partial (approx. 5/16") Overlay
Clip-top 95 Degree Self-Closing Thick Door Full Overlay Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore, Screw-On or Dowel Mounting (Replacement for 70.955, 84.955, 90.955)
Cliptop Full Inset Inserta Thick Door 95 Degree Opening Self-Close Hinge, Door Thickness up to 1-3/16 Inch, 3-Hole Hinge Boring Required
Nexis Inset Screw On 95 degree 40MM Hinge- Self Close
Clip-top 95 Degree Self-Closing Thick Door Partial Overlay Hinge for Door Thickness 5/8" to 1-1/4", 35mm Bore, Screw-On or Dowel Mounting (Replacement for 70.955, 84.955, 90.955)
95 Degree Cliptop Blind Corner Inset-Self-Closing-Dowel
Clip-Top BLUMOTION Partial Overlay Soft-Close 95 Degree Opening Hinge including Dowels, Nickel
0MM Clip Inline Mounting Plate
Round Glass Door Cover Cap, Black
Round Glass Door Cover Cap, Chrome
Grass Tiomos Full Overlay Hinge Self-Close (Spring) Hinge, 95 Degree Opening Angle, Screw-on Mounting
3606 Full Overlay 95 Degree Self-Closing Hinge
Nexis Screw On 95 degree Half Overlay Hinge, Self Close
Nexis Inset Screw On 95 degree Thick Door Hinge, Self Close